Merck
All Photos(1)

2633901

Supelco

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

pkg of 1 ea

All Photos(1)

description

SPME/Splitless for 17A with SPL-17 injector

packaging

pkg of 1 ea

L × O.D. × I.D.

95 mm × 5.0 mm × 0.75 mm

compatibility

for use with Shimadzu 17A with SPL-17 Injectors
technique used for SPME

Looking for similar products? Visit Product Comparison Guide

Related Categories

Compare Similar Items

View Full Comparison

1 of 2

This Item
2637501
Inlet Liner, Direct (SPME) Type, Straight Design (unpacked) pkg of 1 ea

Supelco

2633901

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked) pkg of 1 ea

Supelco

2637501

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

description

SPME/Splitless for 17A with SPL-17 injector

description

-

packaging

pkg of 1 ea

packaging

pkg of 1 ea

L × O.D. × I.D.

95 mm × 5.0 mm × 0.75 mm

L × O.D. × I.D.

78.5 mm × 6.5 mm × 0.75 mm

compatibility

for use with Shimadzu 17A with SPL-17 Injectors

compatibility

-

General description

Inlet liner is an important part within the injection port. The prime functions of inlet liner are to limit sample degradation and improve vaporisation along with correct positioning of syringe needle. A wrong choice of liner can have prominent effect on the chromatogram. The basic problems related with incorrect choice of liner include the higher potential of peak tailing and mass discrimination. The inlet liner volume is recommended to be larger than the amount of sample injected by syringe so as to avoid any reaction with the sample. Injector port liner is suitable to make connection between sample introduction and GC column. Direct type has narrow bore which sustains a high linear velocity through the injection port to diminish band broadening and transferring all the samples to column, flash vaporization.
Deactivated (silanized) glass inlet liner for capillary injection ports.
  • Fits Shimadzu (17A) [with SPL-17 Injector]

Application

Inlet liner, direct type may be used for solid phase microextraction (SPME) sample injection.

Other Notes

I263390 --> material nos. 2633901 (1pq), 2633905 (5pq), & 2633925 (25pq).

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

(enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service