Technical Article

Applied Filters:

facet content type:Technical Article

Showing 1-30 of 2121 results

High-Performance Semiconductor Polymers Based on Diketopyrrolopyrrole and Thienothiophene

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

Inorganic Interface Layer Inks for Organic Electronic Applications

Find advantages of inorganic interface layer inks for organic electronic & other applications.

Light-emitting Polymers

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

Materials Design Concepts for Efficient Blue OLEDs: A Joint Theoretical and Experimental Study

Since their discovery, organic light emitting devices (OLEDs) have evolved from a scientific curiosity into a technology with applications in flat panel displays and the potential to revolutionize the lighting market. During their relatively short history, the technology has rapidly

Mechanochemical Effect of Severe Plastic Deformations: Metal Alloys, Hydrides and Molecular Solids

New Conducting and Semiconducting Polymers for Plastic Electronics

In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.

Optoelectronic Devices with DPP-containing Molecules

Organic materials in optoelectronic devices like LEDs and solar cells are of significant academic and commercial interest.

Organic Bioelectronic Materials and Devices for Bridging Biology and Traditional Electronics

Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.

Organic & Hybrid Electronics for Optical Analysis

Professor Shinar highlights low-cost, disposable sensor configurations in organic and hybrid electronics for healthcare applications.

Organic Materials for Thin Film Transistors

Flexible electronic circuits, displays, and sensors based on organic active materials will enable future generations of electronics products that may eventually enter the mainstream electronics market.

Organic Semiconductor Laser Materials

In this article, we demonstrate that bis-styrylbenzene derivatives show promising characteristics for very low lasing thresholds and discuss the design considerations for organic lasing molecules.

PCBM-Based n-Type Semiconductors

PCBM-based n-type semiconductors - Find p- and n-type organic semiconductors available with PCBM library & properties.

Photonic Optical Materials Tutorial

Organic nonlinear optics have evolved since 1970, driven by Davydov's SHG discovery, focusing on acentric structures for second-order nonlinearity.

Plexcore® OC Hole Injection Inks

Plexcore® organic conductive inks are electronic grade inks formulated for use in the hole injection layers of OLEDs.

Polymer Semiconductors for Intrinsically Stretchable Organic Transistors

Intrinsically stretchable active layers for organic field-effect transistors (OFET) are discussed. Polymer structural modification & post-polymerization modifications are 2 methods to achieve this.

Polytriarylamine Semiconductors

Self-Assembled Monolayers: Advantages of Pure Alkanethiols

We presents an article regarding Self-Assembled Monolayers: Advantages of Pure Alkanethiols.

Self-Assembled Nanodielectrics (SANDs) for Unconventional Electronics

Review the potential of self-assembled multilayer gate dielectric films fabricated from silane precursors for organic, inorganic, and transparent TFT and for TFT circuitry and OLED displays.

Silylethyne-substituted Pentacenes

Silylethyne substitution offers an opportunity to tune solubility for application-specific needs and self-assembly for electronic performance and has yielded semiconductors with excellent device performance.

Soluble Pentacene Precursors

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

High-Purity Sublimed Materials for Organic Electronic Devices

Sublimed materials for organic electronic devices such of OFETs and OTFTs allow the achievement of better electronic properties, and may help increase a device’s lifetime.

Understanding and Successfully Applying Materials for Dye-Sensitized Solar Cells

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100

Block Copolymers in Nanoscale Patterning

Block copolymers coat surfaces for nanoscale patterns, improving resolution to 5-50nm, enabling diverse applications like printable circuits.

Advances in Colloidal Quantum Dots for Applications in the Visible Spectrum

Colloidal quantum dots are nano-meter sized, single-crystalline semiconductor fragments that can have highly customizable optical, electronic, and chemical properties through controlled synthesis.

Conducting Polymer Materials for Flexible OPV Applications: Orgacon™ PEDOT : PSS

A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.

Chemical Deposition Techniques in Materials Design

We presents an article regarding chemical deposition techniques in materials design.

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.

Fullerene-Based Semiconductors

Progress in bulk heterojunction photodiodes since 1995 has improved device performance and widened research scope.

Progress for High Performance Tandem Organic Solar Cells

Professor Chen (Nankai University, China) and his team explain the strategies behind their recent record-breaking organic solar cells, reaching a power conversion efficiency of 17.3%.

Page 1 of 71