Skip to Content
Merck
  • Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Levels of 7-oxocholesterol in cerebrospinal fluid are more than one thousand times lower than reported in multiple sclerosis.

Journal of lipid research (2004-12-04)
Valerio Leoni, Dieter Lütjohann, Thomas Masterman
ABSTRACT

In a recent publication [Diestel, A., O. Aktas, D. Hackel, I. Hake, S. Meier, C. S. Raine, R. Nitsch, F. Zipp, and O. Ullrich. 2003. Activation of microglial poly (ADP-ribose)-polymerase-1 by cholesterol breakdown products during neuroinflammation: a link between demyelination and neuronal damage. J. Exp. Med. 198: 1729-1740], extremely high levels of 7-oxocholesterol were reported in cerebrospinal fluid (CSF) of 11 patients with multiple sclerosis (MS) [7.4 +/- 0.3 mg/l (mean +/- SEM)]. The corresponding level of 12 subjects with other kinds of neurological diseases was reported to be 0.5 +/- 0.1 mg/l. Such high levels of 7-oxocholesterol were found to cause neuronal damage of living brain tissues. Using a highly accurate method for an assay of 7-oxocholesterol based on isotope dilution-mass spectrometry and anaerobic conditions during workup, we found that the level of 7-oxocholesterol in CSF from 29 Swedish patients with MS was only 1.2 microg/l (median, ranging from 0.4 to 4.6 microg/l), less than 1/1,000 th of the previously reported level. The level of 7-oxocholesterol in CSF from 24 Swedish control patients was 0.9 microg/l (0.3-2.3 microg/l), slightly but significantly lower than the CSF level in MS patients (P=0.002). In vitro-induced lipid peroxidation of the endogenous cholesterol in CSF increased the level of 7-oxygenated cholesterol metabolites, particularly 7-oxocholesterol, up to approximately 0.3 mg/l. These results are discussed in relation to the fact that 7-oxygenated steroids are easily artificially formed by autoxidation of cholesterol during workup procedures and analysis of sterols and oxysterols from biological samples.

MATERIALS
Product Number
Brand
Product Description

Copper (S, P), BCR®, certified reference material, chips
Sigma-Aldrich
Aluminum, foil, thickness 0.13 mm, ≥99.99% trace metals basis
Millipore
Bifido Selective Supplement B, suitable for microbiology
Sigma-Aldrich
Calcium, dendritic pieces, purified by distillation, 99.9% trace metals basis
Supelco
L-Cysteine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Nickel, foil, thickness 0.25 mm, 99.995% trace metals basis
Sigma-Aldrich
Titanium, wire, diam. 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
Zinc, powder, <150 μm, 99.995% trace metals basis
Sigma-Aldrich
Tungsten, foil, thickness 0.127 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
Nickel, foil, thickness 0.125 mm, ≥99.9%
Sigma-Aldrich
Molybdenum, wire, diam. 1.0 mm, 99.95% trace metals basis
Sigma-Aldrich
Calcium, granular, 99%
Sigma-Aldrich
L-Cysteine, 97%
Sigma-Aldrich
Nickel, wire, diam. 0.5 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Calcium, dendritic pieces, purified by distillation, 99.99% trace metals basis
Sigma-Aldrich
Calcium, pieces, <1 cm, 99%
Sigma-Aldrich
Tin, 99.8%, shot, 3 mm
Sigma-Aldrich
Copper, powder (dendritic), <45 μm, 99.7% trace metals basis
Sigma-Aldrich
Titanium, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
Titanium, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Titanium, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
Silicon, pieces, 99.95% trace metals basis
Sigma-Aldrich
Silicon, powder, −325 mesh, 99% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.45-0.55 mm, 99.999% trace metals basis
Sigma-Aldrich
Zinc, mossy, ≥99%
Sigma-Aldrich
Nickel, wire, diam. 0.25 mm, ≥99.9%
Sigma-Aldrich
Aluminum, pellets, 3-12 mm, 99.99% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 0.25 mm, 99.999% trace metals basis
Sigma-Aldrich
Aluminum, foil, thickness 1.0 mm, 99.999% trace metals basis