Skip to Content

Sulfur-mediated electron shuttling during bacterial iron reduction.

Sulfur-mediated electron shuttling during bacterial iron reduction.

Science (New York, N.Y.) (2014-05-03)

Theodore M Flynn, Edward J O'Loughlin, Bhoopesh Mishra, Thomas J DiChristina, Kenneth M Kemner

ABSTRACT

Microbial reduction of ferric iron [Fe(III)] is an important biogeochemical process in anoxic aquifers. Depending on groundwater pH, dissimilatory metal-reducing bacteria can also respire alternative electron acceptors to survive, including elemental sulfur (S(0)). To understand the interplay of Fe/S cycling under alkaline conditions, we combined thermodynamic geochemical modeling with bioreactor experiments using Shewanella oneidensis MR-1. Under these conditions, S. oneidensis can enzymatically reduce S(0) but not goethite (α-FeOOH). The HS(-) produced subsequently reduces goethite abiotically. Because of the prevalence of alkaline conditions in many aquifers, Fe(III) reduction may thus proceed via S(0)-mediated electron-shuttling pathways.

MATERIALS

Product Number

Brand

Product Description

Iron, foil, 25mm disks, thickness 0.003mm, 99.85%

Iron, foil, 10mm disks, thickness 0.075mm, hard, 99.5%

Iron, foil, 4mm disks, thickness 0.025mm, as rolled, 99.99+%

Iron, foil, 15mm disks, thickness 0.5mm, hard, 99.5%

Iron, foil, 10mm disks, thickness 0.9mm, as rolled, 99.5%

Iron, foil, 25mm disks, thickness 0.005mm, 99.85%

Iron, foil, 25mm disks, thickness 0.01mm, 99.99+%

Iron, IRMM^®, certified reference material, 0.5 mm wire

Sigma-Aldrich

Iron, chips, 99.98% trace metals basis

Sigma-Aldrich

Iron, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)

Sigma-Aldrich

Iron, foil, thickness 0.1 mm, ≥99.9% trace metals basis

Sigma-Aldrich

sulfur powder, 99.998% trace metals basis

Iron, foil, 50mm disks, thickness 0.038mm, hard, 99.5%

Iron, foil, 50mm disks, thickness 0.075mm, hard, 99.5%

Iron, foil, 5m coil, thickness 0.1mm, hard, 99.5%

Iron, microfoil, disks, 10mm, thinness 0.05μm, specific density 40.44μg/cm², permanent mylar 3.5μm support, 99.99+%

Iron, foil, 8mm disks, thickness 0.05mm, as rolled, 99.99+%

Iron, foil, 6mm disks, thickness 0.5mm, as rolled, 99.99+%

Iron, foil, 5m coil, thickness 0.5mm, coil width 49mm, armco« soft ingot 99.8+%

Iron, foil, light tested, 25x25mm, thickness 0.025mm, hard, 99.5%

Iron, foil, 1m coil, thickness 0.1mm, hard, 99.5%

Iron, foil, 8mm disks, thickness 0.075mm, as rolled, 99.99+%

Iron, foil, 6mm disks, thickness 0.01mm, 99.85%

Iron, foil, 50mm disks, thickness 0.1mm, hard, 99.5%

Iron, foil, 150x150mm, thickness 2.0mm, as rolled, armco« soft ingot 99.8%

Iron, foil, 50x50mm, thickness 0.15mm, hard, 99.5%

Iron, foil, 6mm disks, thickness 0.075mm, hard, 99.5%

Iron, rod, 500mm, diameter 19mm, as drawn, soft ingot 99.8%

Iron, foil, 2m coil, thickness 0.038mm, hard, 99.5%

Iron, foil, 8mm disks, thickness 0.003mm, 99.85%