All Photos(3)




average Mw ~35,000 by LS, average Mn ~16,000 by MO, pellets (Transparent)

Linear Formula:
CAS Number:
MDL number:
PubChem Substance ID:


pellets (Transparent)

autoignition temp.

1022 °F

melt index

6.5 g/10 min (343°C/0.3 Mpa)

mol wt

average Mn ~16,000 by MO
average Mw ~35,000 by LS

reduced viscosity

0.37-0.39 dL/g, 0.2 % (w/v) in chloroform(25 °C)(lit.)


1.24 g/mL at 25 °C (lit.)

SMILES string


Looking for similar products? Visit Product Comparison Guide


Microwave cookware, appliance covers, surgical tools, automotive electrical components, printed circuit boards and plumbing components.


100, 500 g in poly bottle

Features and Benefits

High impact resistance. Temperature use range up to 160°C. Exceptional steam sterilization stability. Electrical properties are maintained over a wide temperature and frequency range. High resistance to radiation degradation.

Physical form

Thermoplastic engineering polymer.

Storage Class Code

11 - Combustible Solids



Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

M U M Junaidi et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 67(9), 2102-2109 (2013-05-10)
Although ultrafiltration (UF) membranes are applicable in wastewater and water treatment, most UF membranes are hydrophobic and susceptible to severe fouling by natural organic matter. In this work, polysulfone (PSf) membrane was blended with silicaluminophosphate (SAPO) nanoparticles, SAPO-34, to study
Christopher G Arges et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(7), 2490-2495 (2013-01-22)
Anion exchange membranes (AEMs) find widespread applications as an electrolyte and/or electrode binder in fuel cells, electrodialysis stacks, flow and metal-air batteries, and electrolyzers. AEMs exhibit poor stability in alkaline media; their degradation is induced by the hydroxide ion, a
Marinela Z Knezevic et al.
Renal failure, 34(7), 849-855 (2012-05-23)
The quality of life in patients undergoing hemodialysis is significantly disturbed. There are data that hemodiafiltration (HDF) may be more effective than conventional hemodialysis in the removal of uremic toxins and may reduce frequency and severity of intradialytic and postdialysis
Li-Luen Hwang et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 66(12), 2712-2721 (2012-10-31)
To overcome the problems and constraints in the application of single organic membranes in wastewater treatment or water reuse processes, different blend membranes were prepared and modified to improve the separation efficiency of humic acids (HAs) and mitigate the fouling
John T Daugirdas et al.
Kidney international, 82(2), 147-157 (2012-05-18)
Substantial activation of platelets can occur in the course of hemodialysis. Platelet surface markers show evidence of platelet degranulation. Some activation occurs due to exposure of blood to the roller pump segment and microbubbles may play a role. Platelet activation

Related Content

Materials Issues in Polymer Electrolyte Membrane Fuel Cells

Fuel cells have the potential to reduce the nation’s energy use through increased energy conversion efficiency and dependence on imported petroleum by the use of hydrogen from renewable resources.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service