This product was designed for the original D class DMP cartridge. For use in the Samba Cartridge, the Jetting temperature needs to be increased to 32 °C.
901971
SunTronic® silver nanoparticle ink for inkjet printing
sintering temperature: 150-250 °C
Synonym(s):
Ag ink, Conductive ink, Silver ink, SunTronic®EMD5730
Sign Into View Organizational & Contract Pricing
Select a Size
2 ML
2 580,00 kr
10 ML
6 380,00 kr
About This Item
Empirical Formula (Hill Notation):
Ag
Molecular Weight:
107.87
UNSPSC Code:
12352103
NACRES:
NA.23
Skip To
description
Electrodes
Sintering temperature: 150-250 °C for 10 – 60 min
Solid content: 40%
Volume Resistivity: 5 – 30 uΩ.cm
form
liquid
surface tension
28-31 dyn/cm
viscosity
11-13 cP (Brookfield)
storage temp.
2-8°C
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | 901879 | 901083 | 901090 |
|---|---|---|---|
| form liquid | form liquid | form liquid | form viscous liquid (paste) |
| description Sintering temperature: 150-250 °C for 10 – 60 min | description Sheet resistivity: <0.010 Ω/sq/mil (150°C/10 min), Solid content: 82-85% (120 °C), Volume resistivity: <2.5x10-5 Ω.cm (150°C/30 min) | description - | description - |
| surface tension 28-31 dyn/cm | surface tension - | surface tension 29 mN/m±3 mN/m | surface tension - |
| viscosity 11-13 cP (Brookfield) | viscosity 45-55 Pa.s | viscosity 13 mPa.s±3 mPa.s(20 °C) | viscosity 4,400-6,400 mPa.s(20 °C) (at 100 s-1), 6,400-10,000 mPa.s(20 °C) (at 40 s-1) |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C |
General description
SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
Application
SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.[1][2][3]
Legal Information
SunTronic is a registered trademark of Sun Chemical, Inc.
Disclaimer
Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Flam. Liq. 2 - STOT RE 2 Oral
Target Organs
Kidney
Storage Class Code
3 - Flammable liquids
WGK
WGK 3
Flash Point(F)
71.6 °F
Flash Point(C)
22 °C
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surfaces
Bower IA, et al.
Flexible and Printed Electronics (2020)
Additively Manufactured mm-Wave Multichip Modules With Fully Printed``Smart''Encapsulation Structures
He X, et al.
IEEE Transactions on Components, Hybrids, and Manufacturing (2019)
Low-Temperature Assembly of Surface-Mount Device on Flexible Substrate Using Additive Printing Process
2018 IEEE 68th Electronic Components and Technology Conference, 379-385 (2018)
Articles
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
-
vale para los cartuchos Dimatix® Materials Cartridge - Samba® Cartridge?
1 answer-
Helpful?
-
-
I was wondering the Fromm value (Z) for your ink was as well as average particle size.
1 answer-
The Fromm value and particle size are not determined for this product.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service