MPGP02001

Millipak^® Express Filter

0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Direct-Q^®, Synergy^® and Milli-Q^® Academic / Biocel / Element / Synthesis / Gradient systems

• Synonym(s): Millipak^® Express 20 Filter
• eCl@ss: 33050190
• NACRES: JA.14

Properties

• material: polyethersulfone filter; styrene-acrylonitrile (SAN) housing
• Quality Level: 300
• sterility: non-sterile
• feature: removal of particulates and bacteria
• packaging: pkg of 1 unit
• manufacturer/tradename: Millipak^®
• matrix: Durapore^®
• pore size: 0.22 μm pore size
• compatibility: for use with Direct-Q^® Water Purification System; for use with Direct-Q^® UV Water Purification System; for use with Milli-Q^® Academic; for use with Milli-Q^® Biocel; for use with Milli-Q^® Element; for use with Milli-Q^® Gradient; for use with Milli-Q^® Synthesis; for use with Synergy^® Water Purification System; for use with Synergy^® UV Water Purification System
• shipped in: ambient

Description

General description

The Millipak^® 0.22 μm hydrophilic membrane filter is intended to produce particulate- and bacteria-free water at the point of dispense of the water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.

Application

Purified water filtered through this filter can be used in any laboratory work where water free of bacteria or particulates is needed.

Features and Benefits

• The unit is designed as a safe and efficient barrier against particulates and bacteria.
• The membrane′s conical pores allow a high flow rate at a low differential pressure.
• The membrane, housing material, and production processes have been selected to minimize organic and inorganic extractable release.
• The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
• Connects to the outlet of the water delivery point, such as the PODs of Milli-Q^® water purification systems.
• The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
• Care-free maintenance: the filter is easily fitted and replaced.
• Non-sterile. Delivered hermetically sealed, with its Certificate of Quality.

Other Notes

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes and is a device that meets requirements under FIFRA. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

SYNERGY is a registered trademark of Merck KGaA, Darmstadt, Germany