Merck
All Photos(1)

RAD121

radiello™ Triangular Support Plate

pk of 20

All Photos(1)
NACRES:
NB.24

packaging

pk of 20

manufacturer/tradename

Radiello Code 121

technique(s)

passive air sampling: suitable

application(s)

air monitoring
environmental
industrial hygiene

Related Categories

General description

A radiello™ diffusive sampler consists of 3 parts: the diffusive body, the adsorbent tube, and the triangular support plate. For personal air sampling, a vertical adapter can be installed. The adsorbent cartridge is removed from its glass or plastic storage tube and is inserted into the diffusive body. This is then threaded onto the triangular support plate in order to place the sampler in its sampling position.
The triangular support plate acts as both a closure and means of suspension for the Radiello diffusive body and cartridge adsorbent during passive air sampling. Each support plate is threaded for easy diffusive body attachment. Each plate includes a clip and transparent adhesive pocket to hold the Radiello barcode label.

Legal Information

radiello is a trademark of Institi Clinici Scientifici Maugeri

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

Isabel M Morales Terrés et al.
Journal of environmental management, 91(12), 2754-2762 (2010-09-03)
This paper describes a novel methodology for evaluating the extent to which petrol stations affect their surroundings. The method is based on the fact that the ratio of the concentrations of aliphatic and aromatic hydrocarbon pollutants in the air of
Study of the dispersion of VOCs emitted by a municipal solid waste landfill
Chiriac, R., et al.
Atmospheric Environment, 43 (11), 1926-1931 (2009)
Benoît Oury et al.
Journal of occupational and environmental hygiene, 3(10), 547-557 (2006-08-16)
Diffusive sampling is particularly suited to determine time-weighted average volatile organic compound (VOC) concentration in occupational hygiene and environmental air monitoring. The purpose of this study was to measure the sampling rate variation of four different samplers in a special
P Bruno et al.
Waste management (New York, N.Y.), 27(4), 539-544 (2006-05-23)
Nuisance caused by odors is one of the most important problems for waste management plants. To control an odor nuisance, it must first be quantified. The analytical difficulties in odor measurements are related to the high number of volatile components
Francesc A Esteve-Turrillas et al.
Journal of chromatography. A, 1216(48), 8549-8556 (2009-10-27)
A new procedure for the passive sampling in air of benzene, toluene, ethylbenzene and xylene isomers (BTEX) is proposed. A low-density polyethylene layflat tube filled with a mixture of solid phases provided a high versatility tool for the sampling of
View All Related Papers

Articles

radiello® Diffusive Air Sampling Application - Phenol, Methylphenol, and Dimethylphenol (thermally desorbed)

Cartridge RAD147 is a stainless steel net cylinder with 100 mesh grid opening and 4.8 mm diameter, packed with 250 ± 10 mg of Tenax-TA, particle size 20-35 mesh. Phenols are trapped by adsorption and recovered by thermal desorption, analysis is performed by capillary gas chromatography and MS detection.

radiello® Diffusive Air Sampling Application - Ammonia

radiello® Diffusive Air Sampling Application - Ammonia

radiello® Diffusive Air Sampling Application - Hydrogen Sulfide

radiello® Diffusive Air Sampling Application - Hydrogen Sulfide

radiello® Diffusive Air Sampling Applications - Aldehydes

Learn about radiello® Diffusive Sampling Aldehydes Applications & Methods.

Protocols

radiello® Diffusive Air Sampling Application - Nitrogen and Sulfur Dioxide

Protocol for radiello® Diffusive Air Sampling Application - Nitrogen and Sulfur Dioxide

radiello® Diffusive Air Sampling Application - Volatile Organic Compounds (VOCs) Thermally Desorbed

Volatile organic compounds are trapped by adsorption and recovered by thermal desorption, analysis is performed by capillary gas chromatography and FID or MS detection.

radiello® Diffusive Air Sampling Application - Ozone

The adsorbing cartridge is formed by a micropore polyethylene tube filled with silica gel coated with 4,4’-dipyridylethylene and closed, at one end, by a PTFE cap. Upon exposure, acid-catalysed ozonolysis of 4,4’-dipyridylethylene leads to 4-pyridylaldehyde.

radiello® Diffusive Air Sampling Application - Anaesthetic Gases and Vapors

Protocol for radiello® Diffusive Air Sampling Application - Anaesthetic Gases and Vapors

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service