Merck
All Photos(1)

RAD145

radiello™ Cartridge Adsorbents

for sampling BTEX and VOCs (thermal desorption), matrix SS net (3 x 8 μm, 4.8 mm diam.), Carbograph, pk of 20

All Photos(1)
NACRES:
NB.24

Agency

EPA IP-6C,TO-14A,TO-15,TO-17 (*Note: This product is not officially specified in the method, it may be suitable for use for sampling compound(s) listed in the method*)
NIOSH 1500,1501,2549 (*Note: This product is not officially specified in the method, it may be suitable for use for sampling compound(s) listed in the method*)
OSHA 111,1002 (*Note: This product is not officially specified in the method, it may be suitable for use for sampling compound(s) listed in the method*)

packaging

pk of 20

manufacturer/tradename

Radiello

technique(s)

passive air sampling: suitable

matrix

SS net (3 x 8 μm, 4.8 mm diam.), Carbograph

application(s)

air monitoring
environmental
industrial hygiene

compatibility

for sampling BTEX and VOCs (thermal desorption)

Looking for similar products? Visit Product Comparison Guide

Related Categories

General description

Several different Radiello cartridge adsorbents are available. Each of which are specific for sampling different classes of compounds. The dimensions for each cartridge are 60 mm L x 4.8 or 5.8 mm D. Each cartridge is designed for one time use with the exception of Radiello thermal desorption (TD) cartridge adsorbents.

Each cartridge arrives in a sealed glass or plastic tube wrapped in a transparent thermally sealed polyethylene (PE) bag. The same sealed tube can be used to store the cartridge after sampling prior to desorption/analysis. A sufficient number of adhesive barcode labels are included with every pack of cartridges for easy tracking of sampling date and time.

Note: To conduct air sampling using the Radiello system, Radiello diffusive bodies and triangular support plates must be ordered (separately) in addition to cartridge adsorbents. Radiello Starter Kits (RADxxxS) include all the necessary parts to complete a sampling.

Legal Information

radiello is a trademark of Institi Clinici Scientifici Maugeri

Storage Class Code

11 - Combustible Solids

WGK

nwg

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

Maurizio Caselli et al.
Environmental research, 109(2), 149-157 (2008-12-26)
Mean volatile organic compound (VOC) concentrations in 16 newspaper stands and in two printing shops were monitored for the purpose of quantifying the various VOCs in these areas and to relate the results. In each site halogenated, oxygenated, aliphatic, and
A new laboratory test chamber for the determination of diffusive sampler uptake rates
Gonzalez-Flesca, N., Frezier, A.
Atmospheric Environment, 39 (22), 4049-4056 (2005)
Ambient Volatile Organic Compound Monitoring by Diffusive Sampling. Compatibility of High Uptake Rate Samplers With Thermal Desorption
Bates, M., et al.
Analyst, 122, 1481-1484 (1997)
Performances of the [TM="Radiello"] diffusive sampler for BTEX measurements: Influence of environmental conditions and determination of modelled sampling rates
Pennequin-Cardinal, A., et al.
Atmospheric Environment, 39 (14), 2535-2544 (2005)
Mariusz Marć et al.
The Science of the total environment, 481, 35-46 (2014-02-28)
Analysis of literature data published in the last few years leads to the conclusion that in the process of assessment of emission flux of organic compounds emitted from different types of equipment and finishing materials, new types of devices, among
View All Related Papers

Articles

Paints & Coatings Solvents Air Monitoring Applications

Solvents are one of the three components of paints. They are petroleum-based chemicals which dissolve the pigment and binding agent for application.

How Does the Diffusive Sampler Work? Why is it so Special?

Learn the how the diffusive air sampler works to see if it’s the right fit for you.

Protocols

radiello® Diffusive Air Sampler Calibration Solutions and Kits

Learn more about radiello air sampler calibration solutions for aldehydes and H2s. We also offer many air sampler calibration kits.

How to use the radiello® Diffusive Air Sampler

Learn how to assemble the supporting plate of your radiello air sampler in the lab before the sampling campaign to save time in the field.

Related Content

Frequently Asked Questions - radiello® Products

Frequently Asked Questions - radiello® Products

Air Monitoring

Air monitoring is used to measure the level of air pollutants in environmental, industrial, or indoor settings to assess the air quality per standards established by health and regulatory agencies.

radiello® Ready-to-Use

Learn more about the ready-to-use air sampler. It may be advantageous when you prefer not to assemble all of the components on field. It can be purchased as it is or in separate parts to be assembled by the customer.

What is radiello® diffusive sampling?

Learn about radiello diffusive sampling and why it’s the best option for your air quality needs.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service