The dimensions are 150 × 150 mm.
267503
钛
foil, thickness 0.25 mm, 99.7% trace metals basis
Titanium
登录 查看组织和合同定价。
关于此项目
经验公式（希尔记法）:
Ti
化学文摘社编号:
分子量:
47.87
NACRES:
NA.23
PubChem Substance ID:
UNSPSC Code:
12141746
EC Number:
231-142-3
MDL number:
跳至
InChI key
RTAQQCXQSZGOHL-UHFFFAOYSA-N
InChI
1S/Ti
SMILES string
[Ti]
assay
99.7% trace metals basis
form
foil
autoignition temp.
860 °F
resistivity
42.0 μΩ-cm, 20°C
thickness
0.25 mm
bp
3287 °C (lit.)
mp
1660 °C (lit.)
density
4.5 g/mL at 25 °C (lit.)
application(s)
battery manufacturing
Quality Level
1 of 4
此商品 | 348848 | 348791 | 460400 |
|---|---|---|---|
| form foil | form foil | form foil | form wire |
| assay 99.7% trace metals basis | assay 99.98% trace metals basis | assay 99.7% trace metals basis | assay 99.7% trace metals basis |
| density 4.5 g/mL at 25 °C (lit.) | density 4.5 g/mL at 25 °C (lit.) | density 4.5 g/mL at 25 °C (lit.) | density 4.5 g/mL at 25 °C (lit.) |
| resistivity 42.0 μΩ-cm, 20°C | resistivity 42.0 μΩ-cm, 20°C | resistivity 42.0 μΩ-cm, 20°C | resistivity 42.0 μΩ-cm, 20°C |
| bp 3287 °C (lit.) | bp 3287 °C (lit.) | bp 3287 °C (lit.) | bp 3287 °C (lit.) |
| mp 1660 °C (lit.) | mp 1660 °C (lit.) | mp 1660 °C (lit.) | mp 1660 °C (lit.) |
Application
钛是一种使用广泛的基质，用于通过阳极氧化过程生成氧化钛纳米管。例如，它可用于制造TiO2薄膜和羟基磷灰石/Gr生物活性涂层。
General description
钛是一种高度耐腐蚀性金属，其应用涵盖电化学催化、航天工程和生物医学植入物领域。它具有良好的强度、生物相容性、杨氏模量和低密度。
Preparation Note
150 × 150 mm（约 25.2g）
存储类别
13 - Non Combustible Solids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
Eyeshields, Gloves, type N95 (US)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
R Khataee et al.
Journal of nanoscience and nanotechnology, 13(7), 5109-5114 (2013-08-02)
In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used
Study of a TiO2 photocatalytic coating for use in plasma catalysis.
K Van Wesenbeeck et al.
Communications in agricultural and applied biological sciences, 78(1), 227-233 (2013-07-24)
Lu-Ning Wang et al.
Journal of nanoscience and nanotechnology, 13(8), 5316-5326 (2013-07-26)
Electrochemically anodized TiO2 nanotubular arrays can provide large surface areas for biological species attachment. In order to further enhance the biocompatibility of Ti medical implants, we deposited a pre-synthesized hydroxyapatite inside and on the nanotubular arrays, and examined the biocompatibility
商品
Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.
-
Bonjour, les feuilles de titane (épaisseur 0,25 mm) ont quelles dimensions (largeur et longueur)? cdlt, Tommaso
1 answer-
Helpful?
-
-
Dimensions of sample (width x height) ?
1 answer-
The dimensions of this item are 150 × 150 mm with a thickness of 0.25 mm.
Helpful?
-
Active Filters
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持