Sigma-Aldrich

硅油 viscosity 350 cSt (25 °C); CAS Number: 63148-62-9; Linear Formula: [-Si(CH3)2O-]n; find Sigma-Aldrich-378372 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

油浴用硅油（从-50℃到+200℃）

viscosity 350&#160;cSt&#160;(25&#160;°C)

硅油 viscosity 350&#160;cSt&#160;(25&#160;°C)

硅油

Silicones

Recent developments and applications of protective silicone coatings: A review of PDMS functional materials

Mechanism of Stabilization of Silicone Oil- Water Emulsions Using Hybrid Siloxane Polymers

Our ability to manipulate stem cells in order to induce differentiation along a desired developmental pathway has improved immeasurably in recent years. That is in part because we have a better understanding of the intracellular and extracellular signals that regulate differentiation. However, there has also been a realization that stem cell differentiation is not regulated only by chemical signals but also by the physical milieu in which a particular stem cell exists. In this regard we are challenged to mimic both chemical and physical environments. Herein we describe a method to induce stem cell differentiation into cardiomyocytes using a combination of chemical and physical cues. This method can be applied to produce differentiated cells for research and potentially for cell-based therapy of cardiomyopathies.

Reverse engineering life: physical and chemical mimetics for controlled stem cell differentiation into cardiomyocytes.

Tip-growing cells have the unique property of invading living tissues and abiotic growth matrices. To do so, they exert significant penetrative forces. In plant and fungal cells, these forces are generated by the hydrostatic turgor pressure. Using the TipChip, a microfluidic lab-on-a-chip device developed for tip-growing cells, we tested the ability to exert penetrative forces generated in pollen tubes, the fastest-growing plant cells. The tubes were guided to grow through microscopic gaps made of elastic polydimethylsiloxane material. Based on the deformation of the gaps, the force exerted by the elongating tubes to permit passage was determined using finite element methods. The data revealed that increasing mechanical impedance was met by the pollen tubes through modulation of the cell wall compliance and, thus, a change in the force acting on the obstacle. Tubes that successfully passed a narrow gap frequently burst, raising questions about the sperm discharge mechanism in the flowering plants.

Quantification of cellular penetrative forces using lab-on-a-chip technology and finite element modeling.

A gold nanorod-facilitated optical heating method for droplets in microfluidic chips is reported. Individual and stream nanoliter level droplets containing gold nanorods are heated by a low power 808-nm-wavelength laser. Owing to the high photothermal conversion efficiency of gold nanorods, a droplet temperature of 95 °C is achieved by employing a 13.6 mW laser with good reproducibility. The heating and cooling times are 200 and 800 ms, respectively, which are attributed to the fast thermal-transfer rates of the droplets. By controlling the irradiation laser power, the temperature cycles for polymerase chain reaction are also demonstrated.

Gold nanorod-facilitated localized heating of droplets in microfluidic chips.

When establishing the most appropriate cells from the huge numbers of a cell library for practical use of cells in regenerative medicine and production of various biopharmaceuticals, cell heterogeneity often found in an isogenic cell population limits the refinement of clonal cell culture. Here, we demonstrated high-throughput screening of the most suitable cells in a cell library by an automated undisruptive single-cell analysis and isolation system, followed by expansion of isolated single cells. This system enabled establishment of the most suitable cells, such as embryonic stem cells with the highest expression of the pluripotency marker Rex1 and hybridomas with the highest antibody secretion, which could not be achieved by conventional high-throughput cell screening systems (e.g., a fluorescence-activated cell sorter). This single cell-based breeding system may be a powerful tool to analyze stochastic fluctuations and delineate their molecular mechanisms.

An automated system for high-throughput single cell-based breeding.

Caenorhabditis elegans is a leading model organism for studying the basic mechanisms of aging. Progress has been limited, however, by the lack of an automated system for quantitative analysis of longevity and mean lifespan. To address this barrier, we developed 'WormFarm', an integrated microfluidic device for culturing nematodes. Cohorts of 30-50 animals are maintained throughout their lifespan in each of eight separate chambers on a single WormFarm polydimethylsiloxane chip. Design features allow for automated removal of progeny and efficient control of environmental conditions. In addition, we have developed computational algorithms for automated analysis of video footage to quantitate survival and other phenotypes, such as body size and motility. As proof-of-principle, we show here that WormFarm successfully recapitulates survival data obtained from a standard plate-based assay for both RNAi-mediated and dietary-induced changes in lifespan. Further, using a fluorescent reporter in conjunction with WormFarm, we report an age-associated decrease in fluorescent intensity of GFP in transgenic worms expressing GFP tagged with a mitochondrial import signal under the control of the myo-3 promoter. This marker may therefore serve as a useful biomarker of biological age and aging rate.

WormFarm: a quantitative control and measurement device toward automated Caenorhabditis elegans aging analysis.

Optical modes of dielectric micro-cavities have received significant attention in recent years for their potential in a broad range of applications. The optical modes are frequently referred to as "whispering gallery modes" (WGM) or "morphology dependent resonances" (MDR) and exhibit high optical quality factors. Some proposed applications of micro-cavity optical resonators are in spectroscopy, micro-cavity laser technology, optical communications as well as sensor technology. The WGM-based sensor applications include those in biology, trace gas detection, and impurity detection in liquids. Mechanical sensors based on microsphere resonators have also been proposed, including those for force, pressure, acceleration and wall shear stress. In the present, we demonstrate a WGM-based electric field sensor, which builds on our previous studies. A candidate application of this sensor is in the detection of neuronal action potential. The electric field sensor is based on polymeric multi-layered dielectric microspheres. The external electric field induces surface and body forces on the spheres (electrostriction effect) leading to elastic deformation. This change in the morphology of the spheres, leads to shifts in the WGM. The electric field-induced WGM shifts are interrogated by exciting the optical modes of the spheres by laser light. Light from a distributed feedback (DFB) laser (nominal wavelength of ~ 1.3 μm) is side-coupled into the microspheres using a tapered section of a single mode optical fiber. The base material of the spheres is polydimethylsiloxane (PDMS). Three microsphere geometries are used: (1) PDMS sphere with a 60:1 volumetric ratio of base-to-curing agent mixture, (2) multi layer sphere with 60:1 PDMS core, in order to increase the dielectric constant of the sphere, a middle layer of 60:1 PDMS that is mixed with varying amounts (2% to 10% by volume) of barium titanate and an outer layer of 60:1 PDMS and (3) solid silica sphere coated with a thin layer of uncured PDMS base. In each type of sensor, laser light from the tapered fiber is coupled into the outermost layer that provides high optical quality factor WGM (Q ~ 10(6)). The microspheres are poled for several hours at electric fields of ~ 1 MV/m to increase their sensitivity to electric field.

Development of whispering gallery mode polymeric micro-optical electric field sensors.

RNA interference (RNAi) is a powerful tool for functional genomics with the capacity to comprehensively analyze host-pathogen interactions. High-throughput RNAi screening is used to systematically perturb cellular pathways and discover therapeutic targets, but the method can be tedious and requires extensive capital equipment and expensive reagents. To aid in the development of an inexpensive miniaturized RNAi screening platform, we have developed a two part microfluidic system for patterning and screening gene targets on-chip to examine cellular pathways involved in virus entry and infection. First, a multilayer polydimethylsiloxane (PDMS)-based spotting device was used to array siRNA molecules into 96 microwells targeting markers of endocytosis, along with siRNA controls. By using a PDMS-based spotting device, we remove the need for a microarray printer necessary to perform previously described small scale (e.g. cellular microarrays) and microchip-based RNAi screening, while still minimizing reagent usage tenfold compared to conventional screening. Second, the siRNA spotted array was transferred to a reversibly sealed PDMS-based screening platform containing microchannels designed to enable efficient cell loading and transfection of mammalian cells while preventing cross-contamination between experimental conditions. Validation of the screening platform was examined using Vesicular stomatitis virus and emerging pathogen Rift Valley fever virus, which demonstrated virus entry pathways of clathrin-mediated endocytosis and caveolae-mediated endocytosis, respectively. The techniques here are adaptable to other well-characterized infection pathways with a potential for large scale screening in high containment biosafety laboratories.

Microfluidic platforms for RNA interference screening of virus-host interactions.

The purpose of this retrospective study is to evaluate patient-related outcome and reoperation rate of the Swanson prosthesis in patients with and without grommets. Between 1981 and 1999, 98 Swanson MTP-1 prostheses were implanted in 84 patients (14 bilateral). The average follow-up was 19 years. Patients were asked to fill in the Foot and Ankle Outcome Score (FAOS) questionnaire and were asked if they had undergone reoperations. In addition, medical records where searched. 36 patients (mean age 71 years) returned the questionnaire. All median FAOS sub scores were 100. There were no differences in FAOS sub scores between patients who had a prosthesis with or without grommets, except for FAOS "activities in daily living" which was lower for patients without grommets. Reoperation rate was 4%. The Swanson silastic double stemmed hinge prosthesis showed good to excellent patient-related outcome and reoperation rate at long-term follow-up.

Nineteen-year follow-up of the silastic double stemmed hinge prosthesis of the first metatarsophalangeal joint.

We have recently demonstrated strong nuclear deformation of SaOs-2 osteosarcoma cells on poly-L-lactic acid (PLLA) micropillar substrates. In the present study, we first demonstrated that chemical and mechanical properties of the micropillar substrates have no dominant effect on deformation. However, SaOs-2 nucleus deformation could be strongly modulated by varying the pillar size and spacing, highlighting the importance of geometric constraints for shaping the nucleus. Furthermore, comparing the capacity for nuclear deformation in three different osteosarcoma cell lines (SaOs-2, MG-63 and OHS-4) revealed strong cell-type specific differences. Surprisingly, the highly-deformable SaOs-2 cell line displayed the highest cell stiffness as assessed by AFM-based colloidal force spectroscopy and featured a more prominent array of actin fibres above the nucleus, suggesting a link between actin-mediated cell stiffness and cell nucleus deformation. In contrast, in MG-63 and OHS-4 cells dense microtubule and vimentin networks seem to facilitate some nuclear deformation even in the absence of a prominent actin cytoskeleton. Together these results suggest that an interaction of all three cytoskeletal elements is needed for efficient nuclear deformation. In conclusion, the dominant parameters influencing nuclear deformation on micropillar substrates are not their material properties but the substrate geometry together with cell phenotype and cytoskeleton organization.

Directing nuclear deformation on micropillared surfaces by substrate geometry and cytoskeleton organization.

Radial head fractures without associated bony or ligamentous injury can be safely treated with internal fixation, if possible, or arthroplasty if nonreconstructable. However, nonreconstructable radial head fractures in association with elbow dislocation and/or ligamentous injury in the elbow or forearm represent a specific subset of injuries that requires restoration of the radiocapitellar articulation for optimal function. The purpose of this article was to summarize the indications for radial head arthroplasty and discuss the reported outcomes.

Radial head fractures: indications and outcomes for radial head arthroplasty.

Silastic implants are popular for cosmetic cheek augmentation. We describe the computed tomographic (CT) and magnetic resonance imaging (MRI) findings in 5 cases (4 patients) with penetration of the medial aspect of Silastic cheek implants through the anterior maxillary sinus wall. Three cases demonstrated associated sinus mucosal thickening, and 3 cases demonstrated infection surrounding the implant. In 3 cases, the implants migrated into the maxillary sinus, and in 1 case the implant also eroded through the nasoantral wall and extended into the nasal cavity. Maxillary sinus penetration is a potential complication of Silastic cheek implants. The extent of this complication can be characterized by CT and MRI.

Imaging of silastic cheek implant penetration into the maxillary sinus.

We present neutron spin echo experiments that address the much debated topic of dynamic phenomena in polymer melts that are induced by interacting with a confining surface. We find an anchored surface layer that internally is highly mobile and not glassy as heavily promoted in the literature. The polymer dynamics in confinement is, rather, determined by two phases, one fully equal to the bulk polymer and another that is partly anchored at the surface. By strong topological interaction, this phase confines further chains with no direct contact to the surface. These form the often invoked interphase, where the full chain relaxation is impeded through the interaction with the anchored chains.

Effect of nanoconfinement on polymer dynamics: surface layers and interphases.

Capability of measuring and monitoring local oxygen concentration at the single cell level (tens of microns scale) is often desirable but difficult to achieve in cell culture. In this study, biocompatible oxygen sensing beads were prepared and tested for their potential for real-time monitoring and mapping of local oxygen concentration in 3D micro-patterned cell culture systems. Each oxygen sensing bead is composed of a silica core loaded with both an oxygen sensitive Ru(Ph2phen3)Cl2 dye and oxygen insensitive Nile blue reference dye, and a poly-dimethylsiloxane (PDMS) shell rendering biocompatibility. Human intestinal epithelial Caco-2 cells were cultivated on a series of PDMS and type I collagen based substrates patterned with micro-well arrays for 3 or 7 days, and then brought into contact with oxygen sensing beads. Using an image analysis algorithm to convert florescence intensity of beads to partial oxygen pressure in the culture system, tens of microns-size oxygen sensing beads enabled the spatial measurement of local oxygen concentration in the microfabricated system. Results generally indicated lower oxygen level inside wells than on top of wells, and local oxygen level dependence on structural features of cell culture surfaces. Interestingly, chemical composition of cell culture substrates also appeared to affect oxygen level, with type-I collagen based cell culture systems having lower oxygen concentration compared to PDMS based cell culture systems. In general, results suggest that oxygen sensing beads can be utilized to achieve real-time and local monitoring of micro-environment oxygen level in 3D microfabricated cell culture systems.

Spatially monitoring oxygen level in 3D microfabricated cell culture systems using optical oxygen sensing beads.

Angiogenesis is a complex morphogenetic process whereby endothelial cells from existing vessels invade as multicellular sprouts to form new vessels. Here, we have engineered a unique organotypic model of angiogenic sprouting and neovessel formation that originates from preformed artificial vessels fully encapsulated within a 3D extracellular matrix. Using this model, we screened the effects of angiogenic factors and identified two distinct cocktails that promoted robust multicellular endothelial sprouting. The angiogenic sprouts in our system exhibited hallmark structural features of in vivo angiogenesis, including directed invasion of leading cells that developed filopodia-like protrusions characteristic of tip cells, following stalk cells exhibiting apical-basal polarity, and lumens and branches connecting back to the parent vessels. Ultimately, sprouts bridged between preformed channels and formed perfusable neovessels. Using this model, we investigated the effects of angiogenic inhibitors on sprouting morphogenesis. Interestingly, the ability of VEGF receptor 2 inhibition to antagonize filopodia formation in tip cells was context-dependent, suggesting a mechanism by which vessels might be able to toggle between VEGF-dependent and VEGF-independent modes of angiogenesis. Like VEGF, sphingosine-1-phosphate also seemed to exert its proangiogenic effects by stimulating directional filopodial extension, whereas matrix metalloproteinase inhibitors prevented sprout extension but had no impact on filopodial formation. Together, these results demonstrate an in vitro 3D biomimetic model that reconstitutes the morphogenetic steps of angiogenic sprouting and highlight the potential utility of the model to elucidate the molecular mechanisms that coordinate the complex series of events involved in neovascularization.

Biomimetic model to reconstitute angiogenic sprouting morphogenesis in vitro.

The use of surfactants during soil washing process can create massive foam, which has a negative impact on the effective use of equipment. A series of tests was conducted to evaluate the defoaming performance of three defoamers and to investigate the influence on removal of polycyclic aromatic hydrocarbons (PAHs) during enhanced soil washing by the addition of the defoamer. Results showed that polydimethylsiloxane oil, which is the most common biomaterial used in commercial antifoaming and defoaming agents, has the best defoaming performance. With the addition of 0.1% polydimethylsiloxane oil, the removal ratios of total 16 PAHs (SigmaPAHs) increased up to 53.48% and 75.92% when washing time was 5 min and 30 min, respectively, compared with the removal ratios of 44.12% and 67.28% with Triton X-100 solution only. This indicated that the proper selection of defoamer not only solves massive foaming problem but also brings out a positive influence on PAH removal during the soil washing process. Three kinds of defoamers (kieselguhr, dodecanol, and polydimethylsiloxane oil) were collected to destroy the foam produced by Triton X-100. Among those defoamers, the polydimethylsiloxane (PDMS) oil has the best defoaming performances. The surface tension of the Triton X-100 solution with the addition of PDMS was lower. The addition of PDMS could improve the removal ratio of SigmaPAHs during soil washing. That may be attributed to the addition of the nonionic surfactant Tergitol NP-10 as the emulsifier in the defoamer. After all, the results do not provide any indication of the influence on the solubilization micelles. It is thus questionable whether other components of PDMS oil could improve the PAH solubilization.

The influence of defoamer on removal of PAHs in soil washing.

To describe a successful paradigm for the treatment of large acoustic neuromas (vestibular schwannomas). Retrospective case review. Tertiary referral center. The charts of 2,875 acoustic neuroma patients at Michigan Ear Institute were reviewed to identify 153 patients who underwent surgical resection for large acoustic neuromas (>=3 cm) between 2000 and 2009. Staged surgical resection or single stage surgery with or without adjuvant stereotactic radiosurgery. Postoperative facial nerve outcomes are reported using the House-Brackmann (HB) facial nerve grading scale and compared with historical controls from a literature review. Rates of adverse outcomes are also reported. Seventy-five patients underwent staged surgical resection of their tumors, whereas 78 patients underwent either single stage surgery or surgery with subsequent stereotactic radiosurgery. Eighty-one percent of patients in the staged surgical resection group had a postoperative HB Grade I or II facial nerve function compared with 75% in the single stage surgical group. Overall, 78% of patients in the current study had HB Grade I or II after treatment compared with a mean of 53% in the literature for similar sized tumors. Our methods including the decision to use staged surgery when necessary, dissection of tumor with stimulating dissector-directed intraoperative monitoring, and use of adjuvant stereotactic radiosurgery are described. Using the described paradigm, large acoustic neuromas can be successfully treated with either staged or single-stage surgical resection with or without adjuvant radiosurgery to obtain more favorable facial nerve outcomes than historically reported controls while minimizing morbidity for the patient.

Improved facial nerve outcomes using an evolving treatment method for large acoustic neuromas.

Actin cytoskeletons, aggregated with myosin II, generate intracellular cytoskeletal tension, which is induced to cell attaching substrate as cell traction forces. It is thought that cytoskeletal tension links closely to cell functions. The present study examined quantitative relationships between cytoskeleton tension and the balance of cell metabolism of tenocytes. Using micromachining techniques, micropillar substrates were prepared with polydimethylsiloxane, having three different values of substrate elasticity (6, 18 and 33 kPa) by changing the micropillar height. After 24h incubation of bovine tenocytes on these micropillar substrates, cell traction forces were determined. Gene expressions for type I collagen (anabolic marker) and MMP-1 (catabolic marker) from tenocytes on micropillars were also analyzed with qPCR. In addition, effects of an inhibition of myosin II activity on tenocyte cytoskeletal tension and metabolism were examined using the inhibitor, blebbistatin. It was exhibited that cell traction forces were significantly larger in tenocytes on 33 kPa substrates compared to those on 6 kPa substrates. This was associated with significant lower expression of MMP-1 mRNA on 33 kPa substrates. Cell traction forces were decreased significantly by the supplementation of blebbistatin in a dose-dependent manner. Indeed, there were significant smaller traction forces and higher expression for MMP-1 mRNA from tenocytes treated with 10 μM blebbistatin compared to their corresponding controls. Accordingly, tenocyte responses to substrate stiffness are associated with alterations in intracellular tension and catabolic gene expression. On the other hand, tenocyte anabolism, as measured by type I collagen mRNA expression, was not altered with substrate stiffness.

硅油

viscosity 350 cSt (25 °C)

属性

质量水平

蒸汽密度

蒸汽压

形式

折射率

粘度

bp

密度

相关类别

说明

一般描述

应用

包装

安全信息

储存分类代码

WGK

闪点(F)

闪点(C)

个人防护装备

文件

分析证书

原产地证书 (CofO)

更多文件

报价与订购

同行评审论文

技术服务