钨 foil, 100x100mm, thickness 0.15mm, as rolled, 99.95%; CAS Number: 7440-33-7; Synonyms: 宽度,钨; find -GF09098129 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich

钨 foil, 100x100mm, thickness 0.15mm, as rolled, 99.95% | Sigma-Aldrich

foil, 100x100mm, thickness 0.15mm, as rolled, 99.95%

钨 foil, 100x100mm, thickness 0.15mm, as rolled, 99.95%

Curves relating beam energy, scattering foil thickness, central-axis depth-dose, and beam flatness have been generated using data taken on a Siemens 200A betatron. The curve set allows a single combination of tungsten foil thickness and electron beam energy to be chosen that will provide the optimum depth-dose distribution and sufficient field flatness for any specific clinical requirement.

Optimisation of field flatness and depth-dose for therapy electron beams.

Thermionic electron emission from 200 to 500 nm thick coatings of scandium oxide on tungsten foil have been examined in thermionic emission microscopy, spectroscopic photoelectron microcopy, synchrotron radiation and ultraviolet photoelectron spectroscopy (UPS). A clear dependence of the scandium oxide-W electron yield on the grain orientation of the polycrystalline tungsten is observed in thermionic emission and photoelectron emission.

Scandium oxide coated polycrystalline tungsten studied using emission microscopy and photoelectron spectroscopy.

The superior colliculus is a layered structure important for body- and gaze-orienting responses. Its superficial layer is, next to the lateral geniculate nucleus, the second major target of retinal ganglion axons and is retinotopically organized. Here we show that in the mouse there is also a precise organization of orientation preference. In columns perpendicular to the tectal surface, neurons respond to the same visual location and prefer gratings of the same orientation. Calcium imaging and extracellular recording revealed that the preferred grating varies with retinotopic location, and is oriented parallel to the concentric circle around the centre of vision through the receptive field. This implies that not all orientations are equally represented across the visual field. This makes the superior colliculus different from visual cortex and unsuitable for translation-invariant object recognition and suggests that visual stimuli might have different behavioural consequences depending on their retinotopic location.

Preference for concentric orientations in the mouse superior colliculus.

Synthetic analogues and reaction systems relevant to the molybdenum and tungsten oxotransferases.

There is emerging evidence that tungsten has toxic health effects. We summarize the recent tungsten toxicity research in this short review. Tungsten is widely used in many commercial and military applications because it has the second highest melting temperature of any element. Consequently, it is important to elucidate the potential health effects of tungsten.

Tungsten toxicity.

The history and changing function of tungsten as the heaviest element in biological systems is given. It starts from an inhibitory element/anion, especially for the iron molybdenum-cofactor (FeMoCo)-containing enzyme nitrogenase involved in dinitrogen fixation, as well as for the many "metal binding pterin" (MPT)-, also known as tricyclic pyranopterin- containing classic molybdoenzymes, such as the sulfite oxidase and the xanthine dehydrogenase family of enzymes. They are generally involved in the transformation of a variety of carbon-, nitrogen- and sulfur-containing compounds. But tungstate can serve as a potential positively acting element for some enzymes of the dimethyl sulfoxide (DMSO) reductase family, especially for CO(2)-reducing formate dehydrogenases (FDHs), formylmethanofuran dehydrogenases and acetylene hydratase (catalyzing only an addition of water, but no redox reaction). Tungsten even becomes an essential element for nearly all enzymes of the aldehyde oxidoreductase (AOR) family. Due to the close chemical and physical similarities between molybdate and tungstate, the latter was thought to be only unselectively cotransported or cometabolized with other tetrahedral anions, such as molybdate and also sulfate. However, it has now become clear that it can also be very selectively transported compared to molybdate into some prokaryotic cells by two very selective ABC-type of transporters that contain a binding protein TupA or WtpA. Both proteins exhibit an extremely high affinity for tungstate (K(D) < 1 nM) and can even discriminate between tungstate and molybdate. By that process, tungsten finally becomes selectively incorporated into the few enzymes noted above.

Tungsten, the surprisingly positively acting heavy metal element for prokaryotes.

The toxicity of nanomaterials has been well known, but mechanisms involved have been little known. This study was aimed at looking at direct interaction between nanomaterials and naked DNA for some fundamental understanding. Two different types of nanomaterials, carbon nanotubes (CNTs) and tungsten trioxide (WO₃) nanoplates, were simply mixed with naked DNA plasmid, respectively, in two different contact modes, dry or wet (in solution), for varied time periods. DNA topological forms were analyzed for changes using gel electrophoresis and fluoro-spectrometry. The nanomaterial-contacted DNA was transferred into bacteria Escherichia coli (E. coli) cells for mutation observation. Certain types and degrees of DNA damage were observed, such as single strand break and double strand break, and bacterial mutation was confirmed. The DNA damage increased with the contacting time in an exponential manner and increased more rapidly in the initial stage for the wet contact. The nanomaterials-contacted DNA transferred bacteria had about less than 10% survival but almost 100% mutation for the surviving cells. The CNTs were more offensive than the metal oxide nanomaterials. The mutation spectrum from the DNA sequencing analysis showed that DNA point mutation was dominated by transversion, which was dominated by guanine changes in the wet contact condition while by cytosine changes in the dry contact condition. The point mutation occurrence in the wet contact was more than in the dry contact, confirming the wet contact more active and thus dangerous than dry contact. This experiment, although as a model study, revealed that direct simple contacts between nanomaterials and DNA could cause DNA changes and thus induce mutations which might potentially lead to cancers, diseases and genetic changes. This could be a mechanism for nanomaterial genotoxicity to the cells and also provided a caution to applications in using nanomaterials for DNA delivery.

Direct nanomaterial-DNA contact effects on DNA and mutation induction.

Tungsten is a widely used transition metal that has not been thoroughly investigated with regards to its ecotoxicological effects. Tungsten anions polymerize in environmental systems as well as under physiological conditions in living organisms. These polymerization/condensation reactions result in the development of several types of stable polyoxoanions. Certain chemical properties (in particular redox and acidic properties) differentiate these polyanions from monotungstates. However, our current state of knowledge on tungsten toxicology, biological and environmental effects is based entirely on experiments where monotungstates were used and assumed by the authors to be the form of tungsten that was present and that produced the observed effect. Recent discoveries indicate that tungsten speciation may be important to ecotoxicology. New results obtained by different research groups demonstrate that polytungstates develop and persist in environmental systems, and that polyoxotungstates are much more toxic than monotungstates. This paper reviews the available toxicological information from the standpoint of tungsten speciation and identifies knowledge gaps and pertinent future research directions.

Does speciation matter for tungsten ecotoxicology?

Since its discovery, tungsten, a transition element of Group VIb of the Periodic Table of Elements, and its compounds have been considered environmentally benign. Its presence in biological and drinking water samples in Fallon, Nevada, an acute lymphocytic leukemia cluster struck community has alarmed public health, environmental and regulatory agencies. Tungsten, a metal of extraordinary properties that make it hardly substitutable, is considered an essential commodity with a wide variety of uses stretching from household necessities to highly specialized applications. This work is undertaken in order to explore aspects of environmental behavior of tungsten and its compounds. Occurrence data in terrestrial, atmospheric, aquatic and biotic systems are presented. Various aspects of environmental chemistry, fate transport across environmental interfaces and toxicology are discussed with the objective of identifying knowledge gaps and outlining directions for future research.

A review of tungsten: from environmental obscurity to scrutiny.

The reaction of M2(O2CBu(t))4 (M = Mo, W) with a dicarboxylic acid in toluene yields compounds of general formula [M2]-O2C-X-CO2-[M2] ([M2] = M2(O2CBu(t))3; X = conjugated spacer). The M2 units are electronically coupled via interactions between the M2 delta and dicarboxylate pi* orbitals, and the magnitude of this coupling is revealed by electronic structure calculations and spectroscopic data. These compounds show intense metal to ligand charge transfer (MLCT) absorptions in the visible region of the electronic spectrum that are temperature and solvent dependent. Evidence of electronic coupling is seen in their cyclic voltammograms, which show two successive one-electron oxidations. The extent of electronic coupling in the mixed valence radical cations [M2]-O2C-X-CO2-[M2]+, generated by oxidation with one equivalent of AgPF6 or FeCp2PF6, is evaluated by EPR and UV-vis-NIR spectroscopic data, and delocalized behavior is observed in compounds with W2 units separated by up to 13.6 angstroms. The simplicity of the frontier M2 orbital interactions with the bridge pi orbitals provides a convenient system with which to study electron transfer in mixed valence systems, as compared to the extensively studied, but more complicated, dinuclear t(2g)6/t(2g)5 mixed valence compounds. Oligomeric and polymeric compounds incorporating M2 units have also been synthesized, having general formula [M2(O2CR)2(O2C-Thio-CO2)]n (Thio = n-hexyl substituted ter- and quinque-thiophenes). They can be deposited as thin films by spin coating, and show photoluminescence and electroluminescence. These metallo-polythiophenes show potential for application in electronic materials. (

Electronically-coupled MM quadruply-bonded complexes of molybdenum and tungsten.

The molybdenum enzymes 4-hydroxybenzoyl-CoA reductase and pyrogallol-phloroglucinol transhydroxylase and the tungsten enzyme acetylene hydratase catalyze reductive dehydroxylation reactions, i.e., transhydroxylation between phenolic residues and the addition of water to a triple bond. Such activities are unusual for this class of enzymes, which carry either a mononuclear Mo or W center. Crystallization and subsequent structural analysis by high-resolution X-ray crystallography has helped to resolve the reaction centers of these enzymes to a degree that allows us to understand the interaction of the enzyme and the respective substrate(s) in detail, and to develop a concept for the respective reaction mechanism, at least in two cases.

Novel bacterial molybdenum and tungsten enzymes: three-dimensional structure, spectroscopy, and reaction mechanism.

Tungstate is an oxyanion that has biological similarities to vanadate. In recent years, a number of studies have shown the antidiabetic effects of oral tungstate in animal models of diabetes. However, because of the tissue accumulation and potential toxicity derived from chronic administration of vanadium and tungsten compounds, the pharmacological use of vanadate or tungstate in the treatment of diabetes is not necessarily exempt from concern. In the context of a potential use in the treatment of human diabetes mellitus, the most relevant toxic effects of vanadium derivatives are reviewed and compared with those reported for tungsten. Hematological and biochemical alterations, loss of body weight, nephrotoxicity, immunotoxicity, reproductive and developmental toxicity, and behavioral toxicity have been reported to occur following exposure to vanadium compounds. Moreover, vanadium also has a mitogenic activity affecting the distribution of chromosomes during mitosis and inducing aneuploidy-related end points. In contrast to vanadate, studies about the toxic effects of tungstate are very scant. Early investigations in cats, rabbits, dogs, mice, and rats showed that tungstate was less toxic than vanadate when given intravenously. Although in vitro investigations showed a direct effect of tungstate on the embryo and fetus of mice at concentrations similar to those causing effects in vivo, information on the potential cellular toxicity of tungstate is particularly scarce. Taking into account the recent interest of tungstate as a new potential oral antidiabetic agent, an exhaustive evaluation of its toxicity in mammals is clearly necessary.

Vanadium and tungsten derivatives as antidiabetic agents: a review of their toxic effects.

Mononuclear molybdenum and tungsten are found in the active site of a diverse group of enzymes that, in general, catalyze oxygen atom transfer reactions. Enzymes of the xanthine oxidase family are the best-characterized mononuclear Mo-containing enzymes. Several 3D structures of diverse members of this family are known. Recently, the structures of substrate-bound and arsenite-inhibited forms of two members of this family have also been reported. In addition, spectroscopic studies have been utilized to elucidate fine details that complement the structural information. Altogether, these studies have provided an important amount of information on the characteristics of the active site and the electron transfer pathways.

Molybdenum and tungsten enzymes: the xanthine oxidase family.

To demonstrate that utilization of the direction-modulated brachytherapy (DMBT) concept can significantly improve treatment plan quality in the setting of high-dose-rate (HDR) brachytherapy for cervical cancer. The new, MRI-compatible, tandem design has 6 peripheral holes of 1.3-mm diameter, grooved along a nonmagnetic tungsten-alloy rod (ρ = 18.0 g/cm(3)), enclosed in Delrin tubing (polyoxymethylene, ρ = 1.41 g/cm(3)), with a total thickness of 6.4 mm. The Monte Carlo N-Particle code was used to calculate the anisotropic (192)Ir dose distributions. An in-house-developed inverse planning platform, geared with simulated annealing and constrained-gradient optimization algorithms, was used to replan 15 patient cases (total 75 plans) treated with a conventional tandem and ovoids (T&O) applicator. Prescription dose was 6 Gy. For replanning, we replaced the conventional tandem with that of the new DMBT tandem for optimization but left the ovoids in place and kept the dwell positions as originally planned. All DMBT plans were normalized to match the high-risk clinical target volume V100 coverage of the T&O plans. In general there were marked improvements in plan quality for the DMBT plans. On average, D2cc for the bladder, rectum, and sigmoid were reduced by 0.59 ± 0.87 Gy (8.5% ± 28.7%), 0.48 ± 0.55 Gy (21.1% ± 27.2%), and 0.10 ± 0.38 Gy (40.6% ± 214.9%) among the 75 plans, with best single-plan reductions of 3.20 Gy (40.8%), 2.38 Gy (40.07%), and 1.26 Gy (27.5%), respectively. The high-risk clinical target volume D90 was similar, with 6.55 ± 0.96 Gy and 6.59 ± 1.06 Gy for T&O and DMBT, respectively. Application of the DMBT concept to cervical cancer allowed for improved organ at risk sparing while achieving similar target coverage on a sizeable patient population, as intended, by maximally utilizing the anatomic information contained in 3-dimensional imaging. A series of mechanical and clinical validations are to be followed.

Direction-modulated brachytherapy for high-dose-rate treatment of cervical cancer. I: theoretical design.

Tungsten and tungsten compounds are considered toxicologically relatively safe. Concern regarding the potential health and environmental effects of depleted uranium and lead in military applications has lead many countries to explore the possibility of applying toxicologically safer metals. Heavy metal tungsten alloy-based munitions have been therefore introduced as a replacement in munitions and as kinetic energy penetrators. Although the toxicological profiles of all these metals are well known, their internalization as embedded shrapnel may be considered a new route for long-term exposure. Studies in experimental animals and cell culture indicate that pellets based on heavy metal tungsten alloy possess carcinogenic potential previously unseen for depleted uranium and/or lead. Other metals in the tungsten alloy such as nickel or cobalt may contribute to such a risk. Accordingly, the long-term tungsten-related health risk is reason for concern. This article reviews toxicological and clinical literature and provides new perspectives on tungsten and tungsten-based alloys.

Metals and health: a clinical toxicological perspective on tungsten and review of the literature.

With diminishing fossil resources and increasing concerns about environmental issues, searching for alternative fuels has gained interest in recent years. Cellulose, as the most abundant nonfood biomass on earth, is a promising renewable feedstock for production of fuels and chemicals. In principle, the ample hydroxyl groups in the structure of cellulose make it an ideal feedstock for the production of industrially important polyols such as ethylene glycol (EG), according to the atom economy rule. However, effectively depolymerizing cellulose under mild conditions presents a challenge, due to the intra- and intermolecular hydrogen bonding network. In addition, control of product selectivity is complicated by the thermal instabilities of cellulose-derived sugars. A one-pot catalytic process that combines hydrolysis of cellulose and hydrogenation/hydrogenolysis of cellulose-derived sugars proves to be an efficient way toward the selective production of polyols from cellulose. In this Account, we describe our efforts toward the one-pot catalytic conversion of cellulose to EG, a typical petroleum-dependent bulk chemical widely applied in the polyester industry whose annual consumption reaches about 20 million metric tons. This reaction opens a novel route for the sustainable production of bulk chemicals from biomass and will greatly decrease the dependence on petroleum resources and the associated CO₂ emission. It has attracted much attention from both industrial and academic societies since we first described the reaction in 2008. The mechanism involves a cascade reaction. First, acid catalyzes the hydrolysis of cellulose to water-soluble oligosaccharides and glucose (R1). Then, oligosaccharides and glucose undergo C-C bond cleavage to form glycolaldehyde with catalysis of tungsten species (R2). Finally, hydrogenation of glycolaldehyde by a transition metal catalyst produces the end product EG (R3). Due to the instabilities of glycolaldehyde and cellulose-derived sugars, the reaction rates should be r₁ < r₂ < r₃ in order to achieve a high yield of EG. Tuning the molar ratio of tungsten to transition metal and changing the reaction temperature successfully optimizes this reaction. No matter what tungsten compounds are used in the beginning reaction, tungsten bronze (HxWO₃) is always formed. It is then partially dissolved in hot water and acts as the active species to homogeneously catalyze C-C bond cleavage of cellulose-derived sugars. Upon cooling and exposure to air, the dissolved HxWO₃ is transformed to insoluble tungsten acid and precipitated from the solution to facilitate the separation and recovery of the catalyst. On the basis of this temperature-dependent phase-transfer behavior, we have developed a highly active, selective, and reusable catalyst composed of tungsten acid and Ru/C. Our work has unearthed new understanding of this reaction, including how different catalysts perform and the underlying mechanism. It has also guided researchers to the rational design of catalysts for other reactions involved in cellulose conversion.

One-pot conversion of cellulose to ethylene glycol with multifunctional tungsten-based catalysts.

Catalytic olefin metathesis has quickly emerged as one of the most often-used transformations in modern chemical synthesis. One class of catalysts that has led the way to this significant development are the high-oxidation-state alkylidene complexes of molybdenum. In this review key observations that resulted in the discovery and development of molybdenum- and tungsten-based metathesis catalysts are outlined. An account of the utility of molybdenum catalysts in the synthesis of biologically significant molecules is provided as well. Another focus of the review is the use of chiral molybdenum complexes for enantioselective synthesis. These highly efficient catalysts provide unique access to materials of exceptional enantiomeric purity and often without generating solvent waste.

Molybdenum and tungsten imido alkylidene complexes as efficient olefin-metathesis catalysts.

Molybdenum and tungsten enzymes which contain the pyranopterin cofactor are ubiquitous in Nature and perform a wide variety of biological functions. They catalyze a diversity of mostly two-electron oxidation-reduction reactions crucial in the metabolism of nitrogen, sulfur and carbon. These enzymes share common structural features, but reveal different polypeptide folding topologies and different active site coordination geometries, which, in part, dictate their function and specificity. On the basis of structural, spectroscopic and biochemical characteristics, they have been classified into three broad families named according to well-studied enzymes of each family: xanthine oxidase, sulfite oxidase and DMSO reductase. An overview of the X-ray crystallography data for representative members of the three enzyme families is given here, focusing on the mechanistic implications drawn from the structural data.

Molybdenum and tungsten enzymes: a crystallographic and mechanistic overview.

Molybdenum is the only second-row transition metal that is required by most living organisms, and the few species that do not require molybdenum use tungsten, which lies immediately below molybdenum in the periodic table. Because of their unique chemical versatility and unusually high bioavailability these two transition metals have been incorporated into the active sites of enzymes over the course of evolution. Enzymes that contain molybdenum or tungsten continue to be discovered and several crystal structures have become available recently. This new structural information has been complemented by spectroscopic and kinetic methods, as well as computational approaches. Together, these studies provide an increasingly detailed view of the reaction mechanisms and the correlation between the electronic structure of the active site and catalytic function, one of the fundamental goals in metallobiochemistry.

Molybdenum and tungsten in biology.

Recent characterisation of molybdenum and tungsten enzymes revealed novel structural types of reaction centres, as well as providing new subjects of interest as synthetic chemical analogues. This tutorial review highlights the structure/reactivity relationships of the enzyme reaction centres and chemical analogues. Chemical analogues for the oxygen atom transfer enzymes have been well expanded in structure and reactivity. Other types of chemical analogues that exhibit different coordination chemistry have recently been presented for reaction centres of the hydroxylation and dehydrogenation enzymes and others.

钨

foil, 100x100mm, thickness 0.15mm, as rolled, 99.95%

属性

测定

形式

manufacturer/tradename

电阻率

bp

mp

密度

SMILES string

InChI

InChI key

说明

一般描述

法律信息

文件

分析证书

原产地证书 (CofO)

更多文件

Quotes and Ordering

同行评审论文

技术服务

支持

订单

公司

社交媒体

Merck