Merck
  • Home
  • Search Results
  • Spatially monitoring oxygen level in 3D microfabricated cell culture systems using optical oxygen sensing beads.

Spatially monitoring oxygen level in 3D microfabricated cell culture systems using optical oxygen sensing beads.

Lab on a chip (2013-02-28)
Lin Wang, Miguel A Acosta, Jennie B Leach, Rebecca L Carrier
ABSTRACT

Capability of measuring and monitoring local oxygen concentration at the single cell level (tens of microns scale) is often desirable but difficult to achieve in cell culture. In this study, biocompatible oxygen sensing beads were prepared and tested for their potential for real-time monitoring and mapping of local oxygen concentration in 3D micro-patterned cell culture systems. Each oxygen sensing bead is composed of a silica core loaded with both an oxygen sensitive Ru(Ph2phen3)Cl2 dye and oxygen insensitive Nile blue reference dye, and a poly-dimethylsiloxane (PDMS) shell rendering biocompatibility. Human intestinal epithelial Caco-2 cells were cultivated on a series of PDMS and type I collagen based substrates patterned with micro-well arrays for 3 or 7 days, and then brought into contact with oxygen sensing beads. Using an image analysis algorithm to convert florescence intensity of beads to partial oxygen pressure in the culture system, tens of microns-size oxygen sensing beads enabled the spatial measurement of local oxygen concentration in the microfabricated system. Results generally indicated lower oxygen level inside wells than on top of wells, and local oxygen level dependence on structural features of cell culture surfaces. Interestingly, chemical composition of cell culture substrates also appeared to affect oxygen level, with type-I collagen based cell culture systems having lower oxygen concentration compared to PDMS based cell culture systems. In general, results suggest that oxygen sensing beads can be utilized to achieve real-time and local monitoring of micro-environment oxygen level in 3D microfabricated cell culture systems.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
硅油, for oil baths (from −50°C to +200°C)
Sigma-Aldrich
硅油, viscosity 5 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 10 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 20 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 1,000 cSt (25 °C)
Sigma-Aldrich
硅油, Dow Corning 200® fluid, viscosity 60,000 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 100 cSt (25 °C)
硅油, for melting point and boiling point apparatuses
Sigma-Aldrich
硅油, viscosity 350 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 10,000 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 50 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 500 cSt (25 °C)
Sigma-Aldrich
钌, powder, 99.99% trace metals basis
Sigma-Aldrich
硅油, viscosity 100,000 cSt (25 °C)
Sigma-Aldrich
硅油, viscosity 30,000 cSt (25 °C)
Sigma-Aldrich
钌, powder, −200 mesh, 99.9% trace metals basis
Sigma-Aldrich
钌, sponge, −100 mesh, 99.9% trace metals basis
Sigma-Aldrich
钌黑