• 主页
  • 查找结果
  • Is tantalum protective against infection in revision total hip arthroplasty?

Is tantalum protective against infection in revision total hip arthroplasty?

The bone & joint journal (2015-01-09)
A T Tokarski, T A Novack, J Parvizi
摘要

We hypothesised that the use of tantalum (Ta) acetabular components in revision total hip arthroplasty (THA) was protective against subsequent failure due to infection. We identified 966 patients (421 men, 545 women and 990 hips) who had undergone revision THA between 2000 and 2013. The mean follow up was 40.2 months (3 months to 13.1 years). The mean age of the men and women was 62.3 years (31 to 90) and 65.1 years (25 to 92), respectively. Titanium (Ti) acetabular components were used in 536 hips while Ta components were used in 454 hips. In total, 73 (7.3%) hips experienced subsequent acetabular failure. The incidence of failure was lower in the Ta group at 4.4% (20/454) compared with 9.9% (53/536) in the Ti group (p < 0.001, odds ratio 2.38; 95% CI 1.37 to 4.27). Among the 144 hips (64 Ta, 80 Ti) for which revision had been performed because of infection, failure due to a subsequent infection was lower in the Ta group at 3.1% (2/64) compared with 17.5% (14/80) for the Ti group (p = 0.006). Thus, the use of Ta acetabular components during revision THA was associated with a lower incidence of failure from all causes and Ta components were associated with a lower incidence of subsequent infection when used in patients with periprosthetic joint infection.

材料
货号
品牌
产品描述

Sigma-Aldrich
钛, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
钛, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
钛, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.025 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, powder, −325 mesh, 99.9% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
钛, sponge, 3-19 mm, 99.5% trace metals basis
Sigma-Aldrich
钛, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
钽, powder, 99.99% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.25 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钛, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
钛, wire, diam. 0.81 mm, 99.7% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
钛, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.05 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, nanopowder, <25 nm particle size (BET), ≥99% trace metals basis
Sigma-Aldrich
钽, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, wire, diam. 0.5 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钛, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
钛, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis
Sigma-Aldrich
钛, foil, thickness 0.127 mm, ≥99.99% trace metals basis
Sigma-Aldrich
钛, wire, diam. 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
钽, powder, 60-100 mesh, 99.9%
Sigma-Aldrich
钛, wire, diam. 2.0 mm, 99.99% trace metals basis
钽, foil, 100x100mm, thickness 0.100mm, annealed, 99.9%
钽, foil, 10mm disks, thickness 0.0125mm, 99.9%
钛, mesh, 150x150mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave
钛, rod, 100mm, diameter 2mm, annealed, 99.6+%