The membrane is not treated with any lubricant to prevent cracking.. A fold test is performed by sampling one roll from the membrane lot; if cracks are detected, all remaining lots in the roll are tested.
SLGV033N
Millex™ PVDF 针式过滤器
pore size 0.22 μm, diam. 33 mm, non-sterile, hydrophilic
同義詞:
0.22 μm PVDF针式过滤器, Durapore® PVDF针式过滤器, Millex-GV 针式过滤器
登入 檢視組織與合約價格。
選擇尺寸
變更視圖
| 您/SKU | 供貨能力 | 價格 |
|---|
關於此項目
UNSPSC Code:
41104922
NACRES:
NB.24
eCl@ss:
32031690
Pore size:
0.22 μm
Diam.:
33 mm
Sterility:
non-sterile
Material:
PVDF membrane, polypropylene housing
暫時無法取得訂價和供貨情況
Quality Segment
material
PVDF membrane, polypropylene housing
sterility
non-sterile
product line
Millex™
feature
holdup volume≤ 80 μL (after air purge), hydrophilic
manufacturer/tradename
Millex™
parameter
45 °C max. temp., 8.6 bar max. inlet pressure (125 psi)
technique(s)
UHPLC: suitable, analytical sample preparation: suitable, low protein-binding filtration: suitable
H
27 mm
diam.
33 mm
filtration area
4.5 cm2
volume
100 mL
color
yellow
matrix
Durapore®
pore size
0.22 μm
input
sample type mild organic solution(s)
sample type aqueous solution(s)
bubble point
≥3.45 bar, air with water at 23 °C
fitting
female Luer-Lok® inlet, male Luer outlet slip
shipped in
ambient
General description
Non-sterile Millex™-GV syringe filters with 0.22 µm hydrophilic Durapore® (PVDF) membrane
- Low protein binding minimizes interaction with your sample to maximize recovery
- Polypropylene housing offers low extractables and broad chemical compatibility
- Membrane type and pore size are printed on the device for easy reference
- A yellow band identifies non-sterile Millex™ filters with hydrophilic Durapore® (PVDF) membrane
- Recommended for filtering 10-100 milliliter (mL) volumes to remove particles prior to instrumentation analysis
Application
Filtration of protein-containing solutions, and aqueous or mild organic solutions
Features and Benefits
仅供一般实验室使用
Legal Information
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a trademark of Merck KGaA, Darmstadt, Germany
1 of 1
本產品 | |||
|---|---|---|---|
| description pore size 0.22 μm, diam. 33 mm, non-sterile, hydrophilic | description pore size 0.45 μm, diam. 33 mm, non-sterile, hydrophilic | description pore size 0.22 μm, diam. 13 mm, non-sterile, hydrophilic | description pore size 0.22 μm, diam. 13 mm, non-sterile, hydrophilic |
| pore size 0.22 μm | pore size 0.45 μm | pore size 0.22 μm | pore size 0.22 μm |
| manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ | manufacturer/tradename Millex™ |
| diam. 33 mm | diam. 33 mm | diam. 13 mm | diam. 13 mm |
| material polypropylene housing, PVDF membrane | material PVDF membrane, polypropylene housing | material PVDF membrane, polypropylene housing | material PVDF membrane, polypropylene housing |
| fitting female Luer-Lok® inlet, male Luer outlet slip | fitting female Luer-Lok® inlet, male Luer outlet slip | fitting outlet tube, female Luer-Lok® inlet | fitting female Luer-Lok® inlet, male Luer outlet slip |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
Still not finding the right product?
-
Is this filter in any lubricant to prevent the membrane from cracking?
1 answer-
Helpful?
-