The glass is ITO coated on one side. The coated side may be determined by holding the glass to the light. It will appear lightly opaque and may display a slight difference in color.
576352
Indium tin oxide coated glass slide, rectangular
surface resistivity 70-100 Ω/sq, slide
Synonym(s):
ITO, ITO coated slide, rectangular
Sign In to View Organizational & Contract Pricing.
About This Item
Linear Formula:
In2O3 · (SnO2)x
CAS Number:
NACRES:
NA.23
PubChem Substance ID:
UNSPSC Code:
12352103
MDL number:
Skip To
InChI
1S/2In.5O.Sn
SMILES string
O=[Sn]=O.O=[In]O[In]=O
InChI key
LNNWKAUHKIHCKO-UHFFFAOYSA-N
surface resistivity
70-100 Ω/sq
L × W × thickness
75 mm × 25 mm × 1.1 mm
transmittance
>87%
refractive index
n20/D 1.517 (lit.)
Quality Level
Looking for similar products? Visit Product Comparison Guide
Related Categories
1 of 4
This Item | |||
|---|---|---|---|
| surface resistivity 70-100 Ω/sq | surface resistivity 15-25 Ω/sq | surface resistivity 8-12 Ω/sq | surface resistivity 70-100 Ω/sq |
| L × W × thickness 75 mm × 25 mm × 1.1 mm | L × W × thickness 75 mm × 25 mm × 1.1 mm | L × W × thickness 25 mm × 25 mm × 1.1 mm | L × W × thickness 25 mm × 25 mm × 1.1 mm |
| transmittance >87% | transmittance >78% | transmittance 84% (nominal at 550nm) | transmittance 86% (nominal at 550nm) |
| refractive index n20/D 1.517 (lit.) | refractive index n20/D 1.517 (lit.) | refractive index n20/D 1.517 | refractive index n20/D 1.517 |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
General description
Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.[1]
Thickness of ITO coating is 150-300 Å.
Resistance may increase to as high as 375 Ω when exposed to temperatures of 300 °C for 30 minutes or more.
To avoid damaging the thin film coating when determining which side is coated, lightly touch the barrelsof the probes to the same surface of a single-side coated product. Testing the alternate side will quicklyshow one with a low resistance as compared to the opposing side, which will exhibit an essentially infiniteresistance.
Resistance may increase to as high as 375 Ω when exposed to temperatures of 300 °C for 30 minutes or more.
To avoid damaging the thin film coating when determining which side is coated, lightly touch the barrelsof the probes to the same surface of a single-side coated product. Testing the alternate side will quicklyshow one with a low resistance as compared to the opposing side, which will exhibit an essentially infiniteresistance.
Application
ITO cover slides may be used for closed digital microfluidic devices and as a transparent electrodes in display and other optoelectronic devices.[2] Some other potential uses that have been reported are:
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
ppe
dust mask type N95 (US), Eyeshields, Gloves
signalword
Danger
hcodes
Hazard Classifications
STOT RE 1 Inhalation
target_organs
Lungs
Storage Class
6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Preparation of non-annealed anatase TiO< sub> 2</sub> film on ITO substrate by anodizing in hot phosphate/glycerol electrolyte for dye-sensitized solar cells.
Tsuji E, et al.
Materials Letters, 91, 39-41 (2013)
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
Optical Fiber Refractometers based on Indium Tin Oxide Coatings with Response in the Visible Spectral Region
Zamarreno CR, et al.
Procedia Engineering, 25, 499-502 (2011)
High-resolution frequency-modulation atomic force microscopy in liquids using electrostatic excitation method.
Umeda K, et al.
Applied Physics Express, 3(6), 065205-065205 (2010)
Andreas Herrmann et al.
Chemistry (Weinheim an der Bergstrasse, Germany), 15(1), 117-124 (2008-12-17)
Application of an electric field to liquid crystalline film forming imines with negative dielectric anisotropy, such as N-(4-methoxybenzylidene)-4-butylaniline (MBBA, 1), results in the expulsion of compounds that do not participate in the formation of the liquid crystalline phase. Furthermore, amines
Articles
A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.
Progress in solution-processed functional materials leads to thin-film optoelectronic devices for industrial and consumer electronics.
Organic Semiconductor Laser Materials
Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.
Protocols
Selenium's roles range from essential dietary element to semiconductor in advanced applications like xerography.
-
Is the glass coated with ITO on one side or both sides?
1 answer-
Helpful?
-
-
How many slides are in each of these packages?
1 answer-
This product is available in 2 package sizes, a pack of 10 and a pack of 25.
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service