Documents
719811
Carbon nanofibers
pyrolitically stripped, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Recommended Products
biological source
platelets (conical)
Assay
>98% carbon basis
form
powder
greener alternative product characteristics
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
D × L
100 nm × 20-200 μm
surface area
54 m2/g
impurities
<14,000 ppm Iron content
average diameter
130 nm
pore size
0.12 cm3/g average pore volume
89.3 Å average pore diameter
mp
3652-3697 °C
density
1.9 g/mL at 25 °C
bulk density
0.5‑3.5 lb/cu.ft
greener alternative category
InChI
1S/C
InChI key
OKTJSMMVPCPJKN-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
1 of 4
This Item | 719803 | 719781 | 804126 |
|---|---|---|---|
| form powder | form powder | form powder | form powder or crystals |
| Quality Level 200 | Quality Level 200 | Quality Level 200 | Quality Level 100 |
| biological source platelets (conical) | biological source platelets (conical) | biological source - | biological source - |
| greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics Design for Energy Efficiency |
| D × L 100 nm × 20-200 μm | D × L 100 nm × 20-200 μm | D × L 100 nm × 20-200 μm | D × L - |
General description
Application
Preparation Note
Legal Information
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Irrit. 2 - STOT SE 3
Target Organs
Respiratory system
Storage Class Code
11 - Combustible Solids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Customers Also Viewed
Articles
Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.
Composite materials that traditionally incorporate micron scale reinforcements in a bulk matrix offer opportunities to tailor material properties such as hardness, tensile strength, ductility, density, thermal and electrical conductivity, and wear resistance.
3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service