MilliporeSigma
All Photos(1)

808156

Sigma-Aldrich

3D printing graphene ink

description

0.12-0.15 Ω-cm (as 3D-printed fibers, not ink, 200-400 μm diameter)

Quality Level

form

viscous liquid

particle size

1-15 nm (thick)
1-20 μm (length and width)

viscosity

25-45 Pa.s(20 °C) (At low shear stresses. Shear thins to ∼10-15 Pa.s at Shear Stress = 100 Pa)

bp

39 °C

density

1.5-1.8 g/mL at 25 °C

storage temp.

2-8°C

Related Categories

Application

  • Direct syringe extrusion into solid fibers or structures-can be extruded by hand, or by machine, from any standard syringe.
  • Dip-coating.
  • Spin-coating.
  • Casting.
  • Fusing-separately produced solid 3D printing graphene objects can be joined via application of additional ink at points of contact.

Pictograms

Exclamation markHealth hazard

Signal Word

Danger

Hazard Classifications

Aquatic Chronic 3 - Carc. 2 - Eye Irrit. 2 - Repr. 1B - Skin Irrit. 2 - STOT SE 3

Target Organs

Respiratory system

Storage Class Code

6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service