All Photos(1)



Silver nanoparticles ink for inkjet printing

Ag ink, Conductive ink, Smart’Ink S-CS01130 conductive ink
Linear Formula:


Resistivity: 1.5 mΩ/sq, per 25 μm (by digital printing using DIMATIX DMP 2800-Cartridge 10 pL, oven curing at 150 °C for 30 min.)

Quality Level




dark brown to blue

surface tension

29 mN/m±3 mN/m


13 mPa.s±3 mPa.s(20 °C)


20±1 % loading (Nanoparticles loading)

storage temp.


General description

Smart′Ink S-CS01130 conductive ink was developed for the printed electronics, is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. This non-toxic nano silver ink is suited to design high resolution conductive patterns on flexible substrates for applications such as antennas, sensors, OPV and OLED grids, electrodes and touchscreen bezel busbars.
Smart′Ink S-CS01130 conductive ink shows improved jetting performance and is successfully used on different tools such as Drop on Demand (DOD) inkjet printer FUJIFILM Dimatix, or such as digital micro-dispensing inkjet printer Microdrop and Microfab.


25 mL

Features and Benefits

Product benefits:
  • Very high electrical conductivity.
  • Low curing temperature for printing on flexible substrates.
  • Non CMR ink.
  • Compatible with various curing process including photonic, IR, low vacuum oven and thermal.
  • Unchanged conductivity on bending.
  • Good adhesion (5B-ASTM D3359) on various flexible substrates (PET, PEN and Kapton).Recommended surface treatment: temperature stabilization, argon plasma.

Preparation Note

  • Qualified printheads: RICOH (MH5420), XAAR (1003 GS6, 128), KONIKA MINOLTA (KM512SHx, KM1024iMHE, KM1024LHB), FUJIFILM (Dimatrix DMP series cartridge)
  • Storage stability: 6 months (fridge)
  • Sintering conditions:
Tunnel furnace: 120°C/5min for; 150°C/5min for; 180°C/5min for; 200°C/5min for
NIR: few seconds for
Photonic curing: <100 ms for
Typical processing guideline
  • Smart′Ink S-CS01130 conductive ink is warmed to room temperature (about 10 minutes) and left for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
  • Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging.

Legal Information

Product of Genes′Ink.

Signal Word


Hazard Classifications

Aquatic Acute 1 - Aquatic Chronic 1 - Asp. Tox. 1 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2 - Skin Sens. 1

Storage Class Code

3 - Flammable liquids



Flash Point(F)

104.0 °F

Flash Point(C)

40 °C

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service