MilliporeSigma
All Photos(1)

901091

Sigma-Aldrich

Zinc oxide ink for inkjet printing

greener alternative
All Photos(1)
Synonym(s):
Helios′Ink H-SZ01034 semiconductive ink, Zinc oxide dispersion, Zinc oxide suspension, ZnO ink, ZnO nanoparticle ink
Linear Formula:
ZnO

description

Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light)
Valence band: 7.9 ± 0.1 eV
Work function: 4.0 ± 0.1 eV

Quality Level

100

form

liquid (dispersion)

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

color

slightly yellow to clear

surface tension

29 mN/m±5 mN/m

viscosity

10.5 mPa.s±3.0 mPa.s(20 °C)

capacity

≥0.9 % loading (Nanoparticles loading)

greener alternative category

Enabling

Related Categories

Compare Similar Items

View Full Comparison

1 of 4

This Item
901065793361901081
Zinc oxide ink for inkjet printing

Sigma-Aldrich

901091

Zinc oxide ink for inkjet printing

Sigma-Aldrich

Sigma-Aldrich

901065

Aluminum-doped zinc oxide ink for inkjet printing

Zinc oxide nanoparticle ink

Sigma-Aldrich

793361

Zinc oxide nanoparticle ink

Sigma-Aldrich

Sigma-Aldrich

901081

Zinc oxide ink for spin coating/slot-die coating

description

Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light)

description

Conductivity: 10-3-10-4 S/cm, Work function: 3.6 ± 0.1 eV

description

-

description

Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light), Valence band: 7.9 ± 0.1 eV, Work function: 4.0 ± 0.1 eV

form

liquid (dispersion)

form

liquid (dispersion)

form

dispersion

form

liquid (dispersion)

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

greener alternative product characteristics

-

greener alternative product characteristics

-

greener alternative product characteristics

-

color

slightly yellow to clear

color

light yellow

color

translucent yellowish

color

light yellow

surface tension

29 mN/m±5 mN/m

surface tension

25 mN/m±5 mN/m

surface tension

-

surface tension

20 mN/m±5 mN/m

viscosity

10.5 mPa.s±3.0 mPa.s(20 °C)

viscosity

10 mPa.s±3 mPa.s(20 °C)

viscosity

-

viscosity

<4 mPa.s(20 °C)

General description

Helios′Ink H-SZ01034, semi conductive ink developed for the printed electronics is particularly well suited for OPV and PV. Helios′Ink H-SZ01034, semi conductive ink shows great performance on Drop on Demand (DOD) inkjet printers, blade coating, and spin coating and is compatible with various flexible substrates (polyimide, PET, PET/ITO, etc.) but also Glass/ITO.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Click here for more information.

Features and Benefits

Product benefits:
  • Easy deposition under atmospheric conditions (temperature and pressure).
  • Good optical performances (visible light transmission >90%).
  • Non CMR ink.
  • Compatible with ITO layer and Ag NWs layer.
  • Compatible with most flexible substrates.
  • Low drying temperature making printing onto flexible substrates possible.
  • Thin layers are obtained (20 nm) with low roughness (RMS = 3±1 nm).

Preparation Note

Typical processing guideline:
  • Can be homogenized for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
  • Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging.
  • Drying conditions: Oven, IR oven, vacuum oven.
  • Clean-up solution: Ethanol/Acetone.

Legal Information

Product of Genes′Ink.

Signal Word

Danger

Hazard Classifications

Acute Tox. 4 Oral - Aquatic Chronic 3 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2

Storage Class Code

3 - Flammable liquids

WGK

WGK 1

Flash Point(F)

111.2 °F - closed cup

Flash Point(C)

44 °C - closed cup

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

(enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service