CLS13951L

Pyrex^® round media storage bottles and reusable screw caps

capacity 1,000 mL

• Synonym(s): Pyrex^® media bottles, bottle, glass media bottles, laboratory bottles, media bottle, pyrex bottle, round bottles
• NACRES: NB.43
• UNSPSC Code: 41121800
• Capacity: 1,000 mL
• Material: borosilicate glass bottle, clear bottle, cylindrical bottle, orange polypropylene cap (plug seal), wide-mouth bottle
• Sterility: non-sterile
• Feature: autoclavable, cap, graduations, reusable
• Fitting: GL 45 neck thread
• Packaging: case of 10

Properties

• material: borosilicate glass bottle, clear bottle, cylindrical bottle, orange polypropylene cap (plug seal), wide-mouth bottle
• sterility: non-sterile
• feature: autoclavable, cap, graduations, reusable
• packaging: case of 10
• manufacturer/tradename: Corning 1395-1L
• availability: not available in EU
• capacity: 1,000 mL
• diam. × H: 101 mm × 225 mm
• fitting: GL 45 neck thread

Description

General description

Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C).

Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots.

Caution: Bottles larger than 2 L should NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

A wide range of optional caps are available for these bottles:

• Vented membrane cap with 0.22 μm PTFE hydrophobic membrane
• Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C)
• PBT caps with silicone septa for syringe sampling or introduction of reagents

These heavy duty 1 L PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.

Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles: -Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification. -Vented membrane cap with 022 μm PTFE hydrophobic membrane. -Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.

Legal Information

PYREX is a registered trademark of Corning, Inc.