MilliporeSigma
  • Z564664
All Photos(1)

Z564664

Secador® Techni-Dome® vacuum desiccator

Synonym(s):
Desiccator, Vacuum Bell Jar, Vacuum Desiccator
NACRES:
NB.43

material

polycarbonate

manufacturer/tradename

Bel-Art F42029-0000

Compare Similar Items

View Full Comparison

1 of 4

This Item
Z119008Z119024Z119016
material

polycarbonate

material

-

material

-

material

-

manufacturer/tradename

Bel-Art F42029-0000

manufacturer/tradename

Bel-Art F42010-0000

manufacturer/tradename

Bel-Art F42025-0000

manufacturer/tradename

Bel-Art F42020-0000

General description

The largest domed desiccator of its kind, offers 65 L (4,000 in.3), with space for items up to 18 in. tall or wide. It is useful for drying, cooling and degassing humidity-sensitive standards, halide salt cells used in IR spectrophotometers, Thin Layer Chromatography plates, electronics and other moisture-sensitive items. Handles interconnect to prevent displacement of the dome top when not under vacuum and also provides for the ability to lock the desiccator or for the placement of tamper evident seals. A molded-in ring allows the dome top to rest safely, inverted on the lab bench, when removed.

Safety locator pins prevent the top half from slipping off the bottom half when raising one side of the lid to add or remove samples. Two round polypropylene shelves 14.5 in. and 9 in. in diameter maximize storage capacity and can be lifted out for easy access. Will hold full vacuum (29 in. Hg, 737 mm) at room temperature for 24 hours and remain airtight even if not under vacuum. The desiccator gasket, with an application of vacuum grease, assures a tight seal down to 0°C.

The polypropylene stopcock has a PTFE plug that turns easily to allow a slow, turbulence free entrance of air which minimizes disturbance of contents. The stopcock has a high visibility red handle and accepts 1/4 in. I.D. tubing.

Not compatible with organic solvents and vapors

Legal Information

Secador is a registered trademark of SP Scienceware, a division of SP
Techni-Dome is a registered trademark of SP Scienceware, a division of SP

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

(enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service