1.50837

LiChrospher^® 100 RP-8 endcapped (5 µm) HPLC Columns

L x I.D. 250 mm x 4 mm, LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• Synonym(s): TM=["LiChrospher"] C8 TM=["LICHROCART"] cartridge for HPLC
• UNSPSC Code: 41115709
• NACRES: SB.52
• Particle size: 5 μm
• Matrix active group: C8 bonding phase
• Pore size: 100 Å pore size
• Matrix: fully porous particle

Properties

• Product Name: LiChrospher^® 100 RP-8 endcapped (5 µm) LiChroCART^™ 250-4, suitable for HPLC
• material: stainless steel column
• agency: suitable for USP L7
• product line: LiChrospher^®
• feature: endcapped
• parameter: 250 bar pressure, 60 °C max. temp.
• technique(s): HPLC: suitable, mass spectrometry (MS): suitable (Low - Medium)
• column L × I.D.: 25 cm × 4 mm
• surface area: 350 m²/g
• matrix: fully porous particle
• matrix active group: C8 bonding phase
• particle size: 5 μm
• pore size: 100 Å pore size
• operating pH range: 2-7.5
• separation technique: reversed phase
• storage temp.: no temp limit
• Quality Level: 100

Description

General description

HPLC cartridge

LiChrospher^® RP-8 endcapped is a reliable and versatile traditionally produced spherical silica gel carrier with C-8 reversed phase properties. It is well suited for the separation of neutral, acidic and weak basic compounds. This sorbent is packed into a LiChroCART 250-4 HPLC cartridge. The connection to the HPLC system is being accomplished by use of the manu-CART NT cartrige holder (1.51486).

Analysis Note

Pressure: ≤ 110 bar
Theoretical Plates (N/m) (Toluene): ≥ 50000
Symmetry (Toluene): 0.8 - 1.4
Capacity factor (Toluene): 1.0 - 2.0

Legal Information

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

LiChrospher is a registered trademark of Merck KGaA, Darmstadt, Germany