Documents
CGW172S48
Polysep™ II 1.0/0.2/0.1 µm nominal, Cartridge
pore size 1.0/0.2/0.1 μm, cartridge nominal length 50 cm (20 in.)
material
borosilicate glass fiber (BGF) membrane
fluoroelastomer O-ring
mixed cellulose esters (MCE) membrane
polypropylene support
Quality Level
reg. compliance
meets FDA 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
autoclavable compatible
steam-in-place compatible
product line
Polysep™
feature
hydrophilic
manufacturer/tradename
Polysep™
technique(s)
prefiltration: suitable
L
20 in.
W
2.7 in.
cartridge nominal length
50 cm (20 in.)
filtration area
0.84 m2
matrix
Polysep™ II
pore size
1.0/0.2/0.1 μm nominal pore size
1.0/0.2/0.1 μm pore size
cartridge code
Code 7
Looking for similar products? Visit Product Comparison Guide
Related Categories
1 of 4
This Item | CGW174S03 | CGW1M4S03 | CGW173S09 |
|---|---|---|---|
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| product line Polysep™ | product line Polysep™ | product line Polysep™ | product line Polysep™ |
| feature hydrophilic | feature hydrophilic | feature hydrophilic | feature hydrophilic |
| technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) prefiltration: suitable |
| filtration area 0.84 m2 | filtration area - | filtration area - | filtration area 1.26 m2 |
General description
Features and Benefits
Preparation Note
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer first page of Visual Inspection Guide and introduction section of Mixed cellulose esters Tech Brief
- Storage Statement: Please refer Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service