GPWP02500
PES Membrane Filter, 0.22 μm Pore Size
Millipore Express®, filter diam. 25 mm, hydrophilic
Synonym(s):
Millipore Express PLUS Membrane Filter
Select a Size
$159.00
$159.00
Estimated to ship TODAYDetails
About This Item
Skip To
material
plain filter, polyethersulfone membrane, white filter
sterility
non-sterile
feature
hydrophilic
manufacturer/tradename
Millipore Express®, Millipore
sustainability
Greener Alternative Product
parameter
15 mL/min water flow rate at 690 mbar (10 psi)
diam.
25 mm
filter diam.
25 mm
thickness
160-185 μm
impurities
≤0.5 EU/mL (LAL test, Aqueous extraction)
pore size
0.22 μm pore size
bubble point
≥1.38 bar, air with 100% IPA at 23 °C
greener alternative category
shipped in
ambient
Quality Level
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | GPWP04700 | GPWP01300 | GPWP09050 |
|---|---|---|---|
| parameter 15 mL/min water flow rate at 690 mbar (10 psi) | parameter 15 mL/min water flow rate at 690 mbar (10 psi) | parameter 15 mL/min water flow rate at 690 mbar (10 psi) | parameter 15 mL/min water flow rate at 690 mbar (10 psi) |
| material plain filter, white filter, polyethersulfone membrane | material plain filter, polyethersulfone membrane, white filter | material plain filter, polyethersulfone membrane, white filter | material plain filter, polyethersulfone membrane, white filter |
| manufacturer/tradename Millipore Express® | manufacturer/tradename Millipore Express® | manufacturer/tradename Millipore Express® | manufacturer/tradename Millipore Express® |
| pore size 0.22 μm pore size | pore size 0.22 μm pore size | pore size 0.22 μm pore size | pore size 0.22 μm pore size |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| feature hydrophilic | feature hydrophilic | feature hydrophilic | feature hydrophilic |
General description
Application
- Sterile filtration
- Buffer filtration
- Tissue culture media filtration
- Sample filtration for PFAS analytical testing (LC-MS)
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
Membrane filters for sample preparation and analysis are discussed, emphasizing chemical compatibility and selectivity.
Validación de los filtros de jeringa Millex® PES en análisis de PFAS de muestras de agua utilizando el método EPA 537.1.
Data and recommended filtration products for PFAS testing using Modified EPA 1633.
Validation of Millex® PES syringe filters in PFAS testing of water samples using EPA method 537.1.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service