MilliporeSigma
All Photos(1)

LA1HCG6S2

Millipore

Millistak+® Lenticular Disc Filter

A1HC, cellulose, filtration area 1.8 m2, hydrophilic

Sign Into View Organizational & Contract Pricing

Select a Size

Synonym(s):
Millistak+ Lenticular Disc Filters, A1HC media series, 16 in. diameter, 8-cell, silicone seal, 2/pack
eCl@ss:
32031690

material

cellulose
filter aid (inorganic)
mixed cellulose esters (MCE)
polypropylene
silicone seal

Quality Level

description

Post-TFF (Prostak) clarification fluids

feature

hydrophilic

manufacturer/tradename

Millistak+®

parameter

0.03 bar max. differential pressure (0.5 psid) (Reverse)
0.2 bar max. inlet pressure (3 psi) at 123 °C
0.21 bar max. differential pressure (3 psid) at 123 °C (Forward)
1 bar max. inlet pressure (15 psi) at 80 °C
1.03 bar max. differential pressure (15 psid) at 80 °C (Forward)
2.07 bar max. differential pressure (30 psid) at 25 °C (Forward)
2.1 bar max. inlet pressure (30 psi) at 25 °C

diam.

40.64 cm (16 in.)

filtration area

1.8 m2

impurities

<0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)

non-volatile residue (NVR)

1.50-2.02 mg/m2 (gravimetric analysis test)

total organic carbon (TOC) residue

416-593 ppb (gravimetric analysis test)
565-1037 ppb

input

sample type liquid

conductivity

5-7 μmho per cm at 25 °C (product water)

filter grade

A1HC

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
LC0HCG6S2LD0HCI6S2LF0HCI6S2
feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

feature

hydrophilic

filtration area

1.8 m2

filtration area

1.8 m2

filtration area

1.57 m2

filtration area

1.57 m2

description

Post-TFF (Prostak®) clarification fluids

description

Perfusion bioreactor fluid

description

Primary clarification directly out of the bioreactor

description

Secondary clarification of pretreated harvest by acid precipitation or flocculation, E. coli and yeast

manufacturer/tradename

Millistak+®

manufacturer/tradename

Millistak+®

manufacturer/tradename

Millistak+®

manufacturer/tradename

Millistak+®

parameter

0.03 bar max. differential pressure (0.5 psid) (Reverse)

parameter

0.03 bar max. differential pressure (0.5 psid) (Reverse), 0.2 bar max. inlet pressure (3 psi) at 123 °C, 0.21 bar max. differential pressure (3 psid) at 123 °C (Forward), 1 bar max. inlet pressure (15 psi) at 80 °C, 1.03 bar max. differential pressure (15 psid) at 80 °C (Forward), 2.07 bar max. differential pressure (30 psid) at 25 °C (Forward), 2.1 bar max. inlet pressure (30 psi) at 25 °C

parameter

0.03 bar max. differential pressure (0.5 psid) (Reverse), 0.21 bar max. differential pressure (3 psid) at 123 °C (Forward), 1.03 bar max. differential pressure (15 psid) at 80 °C (Forward), 2.07 bar max. differential pressure (30 psid) at 25 °C (Forward)

parameter

0.03 bar max. differential pressure (0.5 psid) (Reverse), 0.21 bar max. differential pressure (3 psid) at 123 °C (Forward), 1.03 bar max. differential pressure (15 psid) at 80 °C (Forward), 2.07 bar max. differential pressure (30 psid) at 25 °C (Forward)

General description

Device Configuration: Stack Disk
Stack Design: 16 in. diameter, 8-cell

Application

Post-TFF (Prostak) clarification fluids

Specifications

Filter Grade: A1HC

Preparation Note

Sanitization Protocol
May be hot water sanitized for 20 cycles using purified water @ 80 °C for 30 minutes
Sterilization Method
May be steam sterilized for 3 steam-in-place (SIP) cycles of 30 minutes @ 123 °C

Analysis Note

Gravimetric Extractables: Post autoclave (1 cycle of 30 minutes at 123 °C) and pure water flush of 100 L/m2 (10 L/ft2) of media surface area
Product Water Conductivity at 25°C: after a pure water flush of 10 L/ft2 (100 L/m2) of media surface area per autoclaved (1 cycle of 30 minutes at 123 °C) 12" 16-stack device
The effluent of an autoclaved (1 cycle of 30 minutes @ 123 °C) stacked device is negative after a WFI flush of 10 liters per ft2 (100 L/m2) of media surface area
Total Organic Carbon (TOC) Residue: post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft2 (100 L/m2) of media surface area

Legal Information

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany
Prostak is a trademark of Merck KGaA, Darmstadt, Germany

Pictograms

Health hazard

Signal Word

Danger

Hazard Statements

Precautionary Statements

Hazard Classifications

STOT RE 1 Inhalation

Target Organs

Lungs

Storage Class Code

6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects

WGK

WGK 3


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service