MFGB02SH3
Hydrophobic Durapore® 0.22 µm, Millipak® Final Fill Capsule
sterile; γ-irradiated, Millipak® Final Fill 20
About This Item
Recommended Products
material
polysulfone device
polysulfone support
Quality Level
agency
meets EP 2.6.14
meets JP 4.01
meets USP 85
sterility
irradiated
sterile; γ-irradiated
product line
Millipak® Final Fill 20
feature
hydrophilic
manufacturer/tradename
Millipak®
parameter
0.51 L/min flow rate at 0.69 bar (ΔP)
10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse)
2.1 bar max. differential pressure (30 psi) at 25 °C (Reverse; intermittent)
20 L process volume
25 psi max. differential pressure (1.7 bar) at 80 °C (Forward)
5.5 bar max. inlet pressure (80 psi) at 25 °C
50 psi max. differential pressure (3.5 bar) at 25 °C (Forward)
60 psi max. differential pressure (4.1 bar) at 25 °C (Forward)
technique(s)
sterile filtration: suitable
filter filtration area
100 cm2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, per device; aqueous extraction)
<0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction)
matrix
Durapore®
pore size
0.22 μm pore size
fitting
(6 mm (1/4 in.) Hose Barb Inlet and Outlet)
Looking for similar products? Visit Product Comparison Guide
Related Categories
General description
Packaging
Preparation Note
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer general guidelines section of user guide shipped with this product
- Storage Statement: Please refer user guide shipped with this product
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations
Legal Information
Not finding the right product?
Try our Product Selector Tool.
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service