MFSL06ST3

Millipak^® Final Fill 60 Durapore^®

Inlet: 1.5 in. Sanitary Flange Outlet: 1.5 in. Sanitary Flange Vent: 1/8 in. Hose Barb

• Synonym(s): Durapore^® 5.0 µm, Millipak^® Final Fill Capsule
• UNSPSC Code: 23151806

Properties

• Product Name: Millipak^® Final Fill 60 Durapore^®, Inlet: 1.5 in. Sanitary Flange Outlet: 1.5 in. Sanitary Flange Vent: 1/8 in. Hose Barb
• Quality Level: 400
• material: PVDF membrane, polysulfone housing, polysulfone support, silicone O-ring
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: sterile
• product line: Millipak^® Final Fill
• feature: hydrophilic
• manufacturer/tradename: Durapore^®
• parameter: 0.7 bar max. differential pressure (10 psid) at 25 °C (Reverse), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 3.5 bar max. differential pressure (50 psid) at 25 °C (Forward)
• technique(s): prefiltration: suitable

Description

General description

Device Configuration: Cartridge

Packaging

Double Easy-Open bag

Preparation Note

Sterilization Method: Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126  °C. Devices can withstand a dose ≤40  kGy gamma exposure.

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP 788 Particulate Matter in Injections

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer general guidelines section of user guide shipped with this product
• Storage Statement: Please refer user guide shipped with this product
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which is certified to ISO 9001:2015 Quality Management Systems.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany