MPE050025
Microcon® Centrifugal Filters
MWCO 50 kDa, polyethersulfone membrane (Biomax), sample volume 0.5 mL
Synonym(s):
Biomax polyethersulfone (PES) membrane centrifuge filter
Skip To
material
polyacetal base (membrane support)
polycarbonate device top
polyethersulfone membrane (Biomax)
polypropylene tube (for filtrate/concentrate)
silicone O-ring (medical grade)
description
0.5 mL centrifugal filter
ideal for concentration and desalting of biomolecules
sterility
non-sterile
product line
Microcon®
feature
holdup volume> 10 μL
parameter
0.5 mL sample volume
L
4.5 cm (1.8 in.)
diam.
12.3 mm
filtration area
0.32 cm2
pore size
50 kDa MWCO
1 of 4
This Item | MPE010025 | MPE005025 | MPE300025 |
|---|---|---|---|
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
| pore size 50 kDa MWCO | pore size 10 kDa MWCO | pore size 5 kDa MWCO | pore size 300 kDa MWCO |
| feature holdup volume> 10 μL | feature holdup volume> 10 μL | feature holdup volume> 10 μL | feature holdup volume> 10 μL |
| material polyacetal base (membrane support), polyethersulfone membrane (Biomax), silicone O-ring (medical grade), polycarbonate device top, polypropylene tube (for filtrate/concentrate) | material polyacetal base (membrane support), polycarbonate device top, polyethersulfone membrane (Biomax), polypropylene tube (filtrate/concentrate), silicone O-ring (medical grade) | material polyacetal base (membrane support), polycarbonate device top, polyethersulfone membrane (Biomax), polypropylene tube (filtrate/concentrate), silicone O-ring (medical grade) | material polyacetal base (membrane support), polycarbonate device top, polyethersulfone membrane (Biomax), polypropylene tube (filtrate/concentrate), silicone O-ring (medical grade) |
| filtration area 0.32 cm2 | filtration area 0.32 cm2 | filtration area 0.32 cm2 | filtration area 0.32 cm2 |
| parameter 0.5 mL sample volume | parameter 0.5 mL sample volume | parameter 0.5 mL sample volume | parameter 0.5 mL sample volume |
General description
Simply and efficiently concentrate and desalt solutions of any macromolecule, using any centrifuge that can accept 1.5 mL tubes.
With the Biomax membrane, Microcon® filters offer:
- Reverse spin to maximize recovery, even in the smallest samples
- Convenient storage of filtrate or concentrated sample in standard microfuge tube
- Concentration factors up to 100X
Sample applications:
- Plant
Application
Features and Benefits
- High recovery for small volumes with reverse spin (concentration factor less than 20X)
- Biomax membrane
- Fast processing
Physical form
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Related Content
Microcon® Centrifugal Filters simply and efficiently concentrate and desalt solutions of any macromolecule, using any centrifuge that can accept 1.5 mL tubes. The low nonspecific binding characteristics of the Ultracel® membrane and the other device components, coupled with its medical-grade o-ring seal, allows the device to accommodate several wash steps with minimal sample loss.
The new dual cycle EtO-treated Microcon® DNA Fast Flow PCR Grade devices enable centrifugal concentration at a similar rate as the Microcon® DNA Fast Flow devices, but the EtO treatment greatly reduces the risk that no uncontrolled contaminating nucleic acids enter the analysis process. Both Microcon® devices exhibit faster flow rate (volume filtered per minute) compared to competitor centrifugal products.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service