P3B030A00
Pellicon® 3 Cassette with Biomax® Membrane
30kDa, A Screen, 88 cm2
Synonym(s):
Pellicon® 3 Cassette with Biomax® 30 kDa Membrane, A Screen, 88cm2
Select a Size
About This Item
Skip To
material
TPE seal
polyethersulfone membrane (void free)
polypropylene
polypropylene cap (for end)
polypropylene screen
Quality Level
feature
holdup volume 1.8 mL (in feed channel)
manufacturer/tradename
Pellicon®
parameter
30 psi max. reverse press. exposure at 25 °C (for 24 hours)
4-6 L/min-m2 recirculation rate
40 psi max. transmembrane pressure at 4-50 °C
6.9 bar max. inlet pressure (100 psi)
80 psi max. transmembrane pressure at 4-40 °C
technique(s)
buffer exchange: suitable
protein purification: suitable (concentration)
H
0.8 cm (0.33 in.)
L
20.6 cm (8.1 in.)
W
5.6 cm (2.2 in.)
filtration area
88 cm2
membrane area
88 cm2
gravimetric extractables
≤1500 mg/m2
matrix
Biomax® (Membrane)
pore size
30 kDa NMWCO
pH
1-14
shipped in
ambient
Looking for similar products? Visit Product Comparison Guide
Related Categories
1 of 4
This Item | P3B010A00 | P3B030A01 | P3B030A05 |
|---|---|---|---|
| pore size 30 kDa NMWCO | pore size 10 kDa NMWCO | pore size 30 kDa NMWCO | pore size 30 kDa NMWCO |
| filtration area 88 cm2 | filtration area 88 cm2 | filtration area - | filtration area - |
| technique(s) buffer exchange: suitable, protein purification: suitable (concentration) | technique(s) analytical sample preparation: suitable, buffer exchange: suitable, protein purification: suitable (concentration) | technique(s) buffer exchange: suitable, protein purification: suitable (concentration) | technique(s) buffer exchange: suitable, protein purification: suitable (concentration) |
| matrix Biomax® (Membrane) | matrix Biomax® (Membrane) | matrix Biomax® (Membrane) | matrix Biomax® (Membrane) |
| material TPE seal, polypropylene , polypropylene screen, polyethersulfone membrane (void free), polypropylene cap (for end) | material TPE seal, polyethersulfone membrane (void free), polypropylene , polypropylene cap (for end), polypropylene screen | material TPE seal, polyethersulfone , polypropylene cap (for end), polypropylene screen | material TPE seal, polyethersulfone , polypropylene screen, stainless steel cap (for end; polypropylene-encapsulated) |
| parameter 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 40 psi max. transmembrane pressure at 4-50 °C, 80 psi max. transmembrane pressure at 4-40 °C | parameter 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 40 psi max. transmembrane pressure at 4-50 °C, 5.5 bar max. inlet pressure (80 psi) at 30 °C, 5.5 bar max. transmembrane pressure (80 psig) at 30 °C, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C | parameter 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 40 psi max. transmembrane pressure at 4-50 °C, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C | parameter 30 psi max. reverse press. exposure at 25 °C (for 24 hours), 4-6 L/min-m2 recirculation rate, 40 psi max. transmembrane pressure at 4-50 °C, 6.9 bar max. inlet pressure (100 psi), 80 psi max. transmembrane pressure at 4-40 °C |
General description
The Pellicon® 3 Cassette with Biomax® Membrane is perfect for the filtration of monoclonal antibodies and solutions containing albumin, hormones, vaccines and growth factors.
This P3B030A00 Pellicon® 3 ultrafiltration device features a pore size of 30 kDa NMWCO, a filtration area of 88 cm2, a Biomax® 30 membrane, and dimensions measuring 0.8 cm (H) x 5.6 cm (W) x 20.6 cm (L).
Features and Benefits
- Rugged & reliable – ideally suited for today′s more demanding filtration processes
- High performance – produces excellent resolution, yields and back-pressure resistance
- Optimum product recovery – thanks to proven membrane technology
- Void-free technology – leading-edge membranes resolve virtually any separation challenge
- Defect-free, superior adhesion – Ultracel®uses composite membranes cast on a microporous substrate
- Automated manufacturing – delivers unbeatable performance, consistency and reliability
- Easy installation & care – simple to install and maintain
Analysis Note
Other Notes
Legal Information
Storage Class
8B - Non-combustible corrosive hazardous materials
wgk_germany
WGK 1
Stay compliant with GMP using the Emprove® Program
Accelerate qualification, maintain compliance, and save time with Emprove® Dossiers.
Note: you will be brought to EmproveSuite.com. Your username and password are separate from SigmaAldrich.com and may differ.
Register for free and access Emprove® Dossiers within minutes. Upgrade your subscription plan to unlock advanced and customized content in the Emprove® Suite
Not finding what you are looking for? Visit the Emprove® Program Help page.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Articles
Learn more one the attenuated viral vaccines manufacturing process: cell culture, clarification, nuclease treatment, chromatography, and sterile filtration.
Related Content
This page summarizes key considerations related to regulatory expectations for biomanufacturing including chemicals and polymeric materials. For chemicals, topics include nitrosamines and elemental impurities, and for polymeric materials such as filters and single-use assemblies, the focus is qualification and extractable and leachable testing.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service