MilliporeSigma
All Photos(2)

Documents

PXHVMPC50

Millipore

Pellicon® XL Cassette with Durapore® Membrane

filtration area 50 cm2, pore size 0.45 μm

Sign Into View Organizational & Contract Pricing

Synonym(s):
Pellicon XL Filter Module Durapore 0.45 μm 50cm2
eCl@ss:
32031623
NACRES:
NB.24

material

PVDF membrane
polypropylene
polypropylene screen

Quality Level

feature

holdup volume 3.2 mL

manufacturer/tradename

Pellicon®

parameter

0.03–0.05 L/min recirculation rate
15 mL min. working volume
2.8 bar max. transmembrane pressure (40 psig)
5.5 bar max. inlet pressure (80 psi) at 50 °C

technique(s)

analytical sample preparation: suitable
protein purification: suitable

L

18.8 cm (7.4 in.)

W

3 cm (1.2 in.)

filtration area

50 cm2

membrane nominal area

50 cm2

gravimetric extractables

≤7.5 mg/device

matrix

Durapore®

pore size

0.45 μm nominal pore size
0.45 μm pore size

pH

1-11(cleaning)
1.5–9(continuous)

shipped in

ambient

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
PXDVPPC50PXC010C50PXC005C50
feature

holdup volume 3.2 mL

feature

holdup volume 3.2 mL

feature

holdup volume 3.2 mL

feature

holdup volume 3.2 mL

parameter

0.03–0.05 L/min recirculation rate, 15 mL min. working volume, 2.8 bar max. transmembrane pressure (40 psig), 5.5 bar max. inlet pressure (80 psi) at 50 °C

parameter

0.03-0.05 L/min recirculation rate, 15 mL min. working volume, 2.8 bar max. transmembrane pressure (40 psig), 5.5 bar max. inlet pressure (80 psi) at 50 °C

parameter

0.03-0.05 L/min recirculation rate, 15 mL min. working volume, 2.8 bar max. transmembrane pressure (40 psig), 5.5 bar max. inlet pressure (80 psi) at 50 °C

parameter

0.03-0.05 L/min recirculation rate, 15 mL min. working volume, 2.8 bar max. transmembrane pressure (40 psig), 5.5 bar max. inlet pressure (80 psi) at 50 °C

technique(s)

analytical sample preparation: suitable, protein purification: suitable

technique(s)

analytical sample preparation: suitable, protein purification: suitable

technique(s)

analytical sample preparation: suitable, protein purification: suitable

technique(s)

analytical sample preparation: suitable, protein purification: suitable

filtration area

50 cm2

filtration area

50 cm2

filtration area

50 cm2

filtration area

50 cm2

matrix

Durapore®

matrix

Durapore®

matrix

Ultracel®

matrix

Ultracel®

General description

Filter Code: HVMP
The Pellicon® XL 50 cassette couples our superior ultrafiltration and microfiltration membranes with the first linearly scalable tangential flow filtration (TFF) cassette for processing small volumes. Whether you choose the Biomax® ultrafiltration membrane for its high flux and wide pH compatibility, the unique Ultracel® ultrafiltration membrane for its low protein binding and easy cleaning, or the Durapore® microfiltration membrane for its ultra-low protein binding and excellent retention performance, you are assured of reliable and consistent performance.
For linear scalability to exist within a family of TFF devices, the channel geometry (path length and channel height) must be identical for each filter. The Pellicon® XL 50 cassette is the only TFF product of this size that can make this claim. The feed and permeate flow channels in every Pellicon® XL 50 cassette operate with the same pressure drop, flow velocity and concentration profile as the larger Pellicon® 2 cassettes. Other cassettes change feed or permeate flow channel dimensions or flow directions when scaling from a low-volume to a high-volume device Pellicon® XL 50 cassettes avoid these changes, providing simple, reliable linear scale-up.

Features and Benefits

Type C screen (coarse screen)

Analysis Note

Gravimetric Extractables: after a water flush

Legal Information

BIOMAX is a registered trademark of Merck KGaA, Darmstadt, Germany
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany
ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Storage Class Code

12 - Non Combustible Liquids

WGK

WGK 1

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service