- S7108
S7108
ApopTag Stop/Wash Buffer
ApopTag Stop/Wash Buffer is intended for use in labeling the 3′-OH ends of fragmented DNA during apoptotic cell detection.
Recommended Products
Quality Level
manufacturer/tradename
ApopTag
Chemicon®
technique(s)
activity assay: suitable (apoptosis)
shipped in
dry ice
Compare Similar Items
View Full Comparison1 of 4
This Item | S7105 | S7106 | S7117 |
|---|---|---|---|
| technique(s) activity assay: suitable (apoptosis) | technique(s) activity assay: suitable (apoptosis) | technique(s) activity assay: suitable (apoptosis) | technique(s) activity assay: suitable (apoptosis) |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| manufacturer/tradename ApopTag | manufacturer/tradename ApopTag, Chemicon® | manufacturer/tradename ApopTag, Chemicon® | manufacturer/tradename ApopTag, Chemicon® |
| shipped in dry ice | shipped in dry ice | shipped in dry ice | shipped in ambient |
General description
Materials Provided
Each bottle contains 20 ml of ApopTag Stop/Wash Buffer.
ApopTag is a registered trademark of Serologicals Company.
Application
Prepare Working Strength Stop/Wash Buffer by adding:
1 ml ApopTag Stop/Wash Buffer
34 ml dH2O
35 ml Total
This amount is sufficient to treat 5 slides in a coplin jar. Working Strength Stop/Wash Buffer may be prepared in advance and stored in a glass or plastic container at 4°C for up to one (1) year. Use a fresh aliquot for each experiment.
Working Strength Stop/Wash Buffer is ready for use at the "APPLY STOP/WASH BUFFER" protocol step in The Complete ApopTag Manual.
NOTE: Agitate for 15 seconds and incubate for 10 min. at room temperature to avoid precipitation.
Storage and Stability
Legal Information
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A - STOT RE 2 Inhalation
Target Organs
Respiratory Tract
Storage Class Code
8B - Non-combustible, corrosive hazardous materials
WGK
WGK 2
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
(enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service