SHVEA47HH3

Millipore Express^® SHR with prefilter 0.5/0.1µm, OptiScale^® 47mm Capsule

Fittings 1/4 in. HB/HB, Autoclavable

• Synonym(s): Optiscale 47mm Millipore Express SHR 0.5/0.1 μm 1/4 in. HB/HB, Millipore Express^® SHRP, OptiScale^® Capsule
• UNSPSC Code: 23151806
• eCl@ss: 32031690

Properties

• Product Name: OptiScale^® 47 Capsule Media: Millipore Express^® SHR w/Prefilter 0.5 / 0.1 µm, Max Pressure: 80 psi @ 25 °C, pore size 0.5/0.1 μm
• Quality Segment: 400
• material: PVDF vent cap, fluoroelastomer FKM seal, polycarbonate , polyethersulfone , polypropylene support
• reg. compliance: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• sterility: non-sterile
• sterilization compatibility: autoclavable compatible
• product line: OptiScale^® 47
• feature: hydrophilic
• manufacturer/tradename: Millipore Express^®
• parameter: 25 °C max. inlet temp., 5.5 bar max. inlet pressure (80 psi) at 25 °C, 80 psig max. inlet pressure
• technique(s): sterile filtration: suitable
• L: 9.4 cm (3.70 in.)
• W: 2.75 in.
• cartridge nominal length: 3.70 in. (94 mm)
• diam.: 6.9 cm (2.7 in.)
• filtration area: 17.7 cm²
• inlet connection diam.: 1/4 in.
• outlet connection diam.: 1/4 in.
• matrix: Millipore Express^® SHR (w/Prefilter)
• pore size: 0.5/0.1 μm pore size
• bubble point: ≥2586 mbar (37.5 psig), nitrogen with 70/30% IPA/water at 23 °C
• fitting: inlet hose barb, outlet hose barb, (6 mm (1/4 in.) Hose Barb Inlet and Outlet)

Description

General description

Device Configuration: Capsule

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min @ 126 °C

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

Other Notes

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation and wetting sections of OPTISCALE^®-25 user guide
• Storage Statement: Please refer to OPTISCALE^®-25 user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Legal Information

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany