SMP8A25NB6
Milligard® PES 1.2/0.8 µm, OptiScale® Capsule
filtration area 3.5 cm2, OptiScale® 25, pore size 1.2/0.8 μm
Synonym(s):
OptiScale 25 Milligard PES 1.2/0.8 μm NB
Select a Size
This item is not able to be purchased as a guest user. For further information, please contact us at +1 866 227 3811or
.Select a Size
About This Item
Skip To
This item is not able to be purchased as a guest user. For further information, please contact us at +1 866 227 3811or
.material
polyethersulfone membrane
polypropylene
polypropylene support
polypropylene vent cap
Quality Level
sterility
non-sterile
sterilization compatibility
autoclavable compatible
product line
OptiScale® 25
feature
hydrophilic
manufacturer/tradename
OptiScale®
parameter
0 bar max. differential pressure (Reverse)
4.14 bar max. differential pressure (60 psi) at 25 °C (Forward)
60 psi max. inlet pressure (4.1 bar)
technique(s)
prefiltration: suitable
L
3.9 cm (1.52 in.)
W
1.21 in.
diam.
3.1 cm (1.2 in.)
filtration area
3.5 cm2
impurities
<0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction; meeting requirements of USP <85>, EP 2.6.14 and JP 4.01)
matrix
Milligard® PES
pore size
1.2/0.8 μm pore size
fitting
female Luer-Lok® inlet connection
male Luer-Lok® outlet connection
(Female Luer-Lok® Inlet/Male Luer Slip Outlet)
cartridge code
not applicable
1 of 4
This Item | SMP4A25NB6 | SVSSA25NB6 | SMP2A25NB6 |
|---|---|---|---|
| pore size 1.2/0.8 μm pore size | pore size 1.2/0.45 μm pore size | pore size - | pore size 1.2/0.2 μm nominal pore size, 1.2/0.2 μm pore size |
| filtration area 3.5 cm2 | filtration area 3.5 cm2 | filtration area 3.5 cm2 | filtration area 3.5 cm2 |
| product line OptiScale® 25 | product line OptiScale® | product line OptiScale® 25 | product line OptiScale® 25 |
| technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) sterile filtration: suitable | technique(s) bioburden reduction: suitable |
| material polyethersulfone membrane, polypropylene support, polypropylene vent cap | material polyethersulfone membrane, polypropylene , polypropylene support, polypropylene vent cap | material PVDF membrane, mixed cellulose esters (MCE) membrane, polypropylene , polypropylene support, polypropylene vent cap | material polyethersulfone membrane, polypropylene , polypropylene support, polypropylene vent cap |
| matrix Milligard® PES | matrix Milligard® PES | matrix Multimedia Durapore® | matrix Milligard® PES |
General description
Other Notes
- Mode of Action: Filtration (size exclusion)
- Application: Protein purification
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
- Storage Statement: Please refer OPTISCALE®-25 user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Preparation Note
Capsule integrity was maintained after 1 autoclave cycle of 60 minutes at 123 °C.
Analysis Note
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service