VPMHKITNB9
Viresolve® Pro Shield H
Virus prefilter, Viresolve® Pro Shield H, Micro kit, filtration area 3.1 cm²
Synonym(s):
Viresolve® Pro Shield H Micro Kit, Viresolve® Pro Shield H
Select a Size
About This Item
Skip To
Product Name
Viresolve® Pro Shield H Micro Kit, TOP LAYER MEMBRANE LOT NO.
material
polyethersulfone membrane ((PES)), white PVDF device (molded parts (yellow band))
parameter
4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
H × diam. × filtration area
3.83 cm (1.51 in.) × 3.07 cm (1.21 in.) × 3.1 cm2
filtration area
3.1 cm2
weight
4 gempty
impurities
may contain <0.25 EU/mL bacterial endotoxins (LAL test)
fitting
female Luer-Lok® inlet (inlet and vent), male Luer outlet (Slip)
storage temp.
2-30°C
Quality Level
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | VPMKVALNB9 | VPMSKITNB9 | VPPH102NB1 |
|---|---|---|---|
| material polyethersulfone membrane ((PES)), white PVDF device (molded parts (yellow band)) | material polyethersulfone membrane ((PES)), white PVDF device (molded parts) | material molded polypropylene component(s), polyethersulfone membrane, white device (magenta band) | material PVDF housing, polyethersulfone membrane, silicone O-ring, white device |
| parameter 4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.) | parameter 4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.) | parameter 3.5 bar max. inlet pressure (50 psig), 4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.) | parameter 4.1 bar max. inlet pressure (60 psig) |
| H × diam. × filtration area 3.83 cm (1.51 in.) × 3.07 cm (1.21 in.) × 3.1 cm2 | H × diam. × filtration area 4.03 cm (1.59 in.) × 4.37 cm (1.72 in.) × 3.4 cm2 | H × diam. × filtration area - | H × diam. × filtration area - |
| filtration area 3.1 cm2 | filtration area 3.4 cm2 | filtration area 3.1 cm2 | filtration area 0.07 m2 |
| weight 4 gempty | weight 14.73 gempty | weight - | weight 0.63 kg (1.39 lb) |
| impurities may contain <0.25 EU/mL bacterial endotoxins (LAL test) | impurities may contain <0.25 EU/mL bacterial endotoxins (LAL test) | impurities <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction) | impurities <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction) |
Application
Features and Benefits
- Small scale devices for process development, optimization and validation studies
- Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
- Nine units per kit (one Membrane lot)
General description
* Viresolve® Pro devices are built with two membrane layers. Each Viresolve® Pro Shield H Micro device is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number.
Other Notes
Legal Information
related product
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Related Content
Multi-Tier Approach to Assuring Virus Retention and Integrity of Viresolve® Pro Devices
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service