MilliporeSigma

VPPS102NB1

Millipore

Viresolve® Pro Modus 1.2

Sign Into View Organizational & Contract Pricing

Synonym(s):
Viresolve® Pro Modus 1.2 Shield
eCl@ss:
32031690

material

polyethersulfone

Quality Level

product line

EMPROVE® Filter

parameter

60 psig max. inlet pressure

device size

1.2 in.

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

Related Categories

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
VPPH102NB1VPPS202NB1VPMG202NB1
vibrant-m

VPPS102NB1

Viresolve® Pro Modus 1.2

vibrant-m

VPPH102NB1

Viresolve® Pro Modus 1.2

vibrant-m

VPPS202NB1

Viresolve® Pro Modus 2.2

vibrant-m

VPMG202NB1

Viresolve® Pro Modus 2.2

material

polyethersulfone

material

PVDF housing, polyethersulfone membrane, silicone O-ring, white device

material

polyethersulfone

material

PVDF housing, polyethersulfone membrane, silicone gasket

parameter

60 psig max. inlet pressure

parameter

4.1 bar max. inlet pressure (60 psig)

parameter

60 psig max. inlet pressure

parameter

60 psig max. inlet pressure

device size

1.2 in.

device size

-

device size

2.2 in.

device size

2.2 in.

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

impurities

<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

Quality Level

400

Quality Level

400

Quality Level

400

Quality Level

400

General description

The Viresolve® Pro Solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Viresolve Pro Modus Devices are typically used for filtration of pilot to mid-scale batch volumes of proteins. The Viresolve® Pro Modus 1.2 Shield offers a filtration area of 0.07 m2 and has a primary use in pilot/small-volume processing.

Features and Benefits

  • Pilot and mid scale manufacturing
  • Three different size formats
  • Fully self contained (hardware holder not required)
  • Fully disposable single-use fluid path
  • Devices 100% tested with air/water diffusion and Binary Gas Test
  • Shield / Shield H 100% aerosol tested

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Preparation Note

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

TOC/Conductivity
After a controlled water flush of 100 L/m², samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.

Legal Information

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

Disclaimer

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service