The item is not autoclavable. The maximum recommended temperature is 70°C. See below for Maintenance & Cleaning instructions:
- Clean the filter holder regularly. The frequency of cleaning will depend on the level of contamination in the fluid being filtered.
1. Remove the holder from the plumbing system.
2. Disassemble it completely and remove all Teflon wrapping from the connector threads.
3. Clean components with a sponge, hot water, and a non-abrasive cleaner. Scrub threaded parts, recesses, and orifices with a stiff bristle brush and cleaner to remove all traces of contaminants. CAUTION: To avoid damage never use steel wool or abrasive materials on any part of the holder or support screens.
4. Rinse all parts thoroughly with hot running tap water and then rinse with cold laboratory grade water.
5. Allow the components to air dry while disassembled.
XX4304700
In-Line Filter Holder 47 mm
In-Line Filter Holder 47mm
Synonym(s):
47 mm Filter Holder
Select a Size
| Size/SKU | Availability | Price |
|---|---|---|
1 ea | Check Cart for Availability | $322.00 |
About This Item
$322.00
Quality Segment
material
Nylon knob(s) (for hand), polypropylene (filled), silicone seal
parameter
5.5 bar max. inlet pressure (80 psi), 70 °C max. temp. at 5.5 bar
technique(s)
pressure filtration: suitable
L
12 cm
diam.
7.6 cm
filter diam.
47 mm
filtration area
13.8 cm2
prefilter diam.
42 mm , thick depth prefilter, 47 mm , membrane prefilter
fitting
inlet connector for 6-9.5 mm I.D. flexible tubing, 1/4 in. female NPT inlet fitting, outlet connector for 6-9.5 mm I.D. flexible tubing, 1/4 in. female NPT outlet fitting
application(s)
filtration
compatibility
for use with In-Line Filter Holder
shipped in
ambient
General description
Features & Benefits:
•Stepped hose barb connections at both ends for easy installation
•Large, easy to grip hand knobs
Catalog Number Description
XX4304700 In-Line Filter Holder 47 mm
Replacement Parts
XX1104715 Support screen, 47 mm, polypropylene
XX4304701 O-ring (2-131), silicone
XX4304704 Hose adapter, 1/4 in. NPTF to 5/16 in. ID, polypropylene
XX4304705 Hand Knobs
Accessories
XX4304702 O-ring, (2-131), fluoroelastomer
XX4304707 Stainless Steel Support Screen, 47 mm
XX6200006P Filter forceps, blunt end, stainless steel
XX6700034 3 meters PVC tubing with 9.5 mm internal diameter
1 of 1
This Item | |||
|---|---|---|---|
| description In-Line Filter Holder 47mm | description Accessories for filter holders for sample preparation. | description Accessories for filter holders for sample preparation. | description Accessories for filter holders for sample preparation. |
| material Nylon knob(s) (for hand), silicone seal, polypropylene (filled) | material stainless steel | material Nylon | material silicone O-ring |
| Quality Level 100 | Quality Level 100 | Quality Level 100 | Quality Level 100 |
| compatibility for use with In-Line Filter Holder | compatibility - | compatibility for use with 1-port Holder In-line | compatibility - |
| parameter 70 °C max. temp. at 5.5 bar, 5.5 bar max. inlet pressure (80 psi) | parameter - | parameter - | parameter - |
| filtration area 13.8 cm2 | filtration area - | filtration area - | filtration area - |
| L 12 cm | L - | L - | L - |
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
-
Hello Dear. Is it Autoclavable?
1 answer-
Helpful?
-