All of the materials of construction are autoclave compatible. It is recommended that filters not be sealed tight during the cycle. Once the cycle is complete and the devices have cooled it is then recommended that the devices be tightened and sealed prior to use. Autoclaving a device under the proper conditions allows for sterilization of that device. The device can withstand the saturated steam at high temperatures (121°C or 250°F) and pressures (103 kPa or 15 psi) for the typical 15- 45 minute cycle associated with the process. The materials of construction of this device can withstand up to 131°C which is 10°C higher than what is expected to be observed during a standard autoclave cycle.
XX4404700
Filter Holder, 47 mm, stainless steel
Filter Holder, 47mm, stainless steel
Synonym(s):
47 mm filter holder, Stainless steel filter holder
Sign Into View Organizational & Contract Pricing
Select a Size
1 EA
$882.00
$882.00
Estimated to ship TODAY
About This Item
UNSPSC Code:
41104909
eCl@ss:
32031613
NACRES:
NB.24
Skip To
material
silicone seal
stainless steel
Quality Level
parameter
19 bar max. inlet pressure (275 psi)
technique(s)
pressure filtration: suitable
H
2.7 cm
diam.
7.6 cm
filter diam.
47 mm
filtration area
13.8 cm2
fitting
1/4 in. female NPT inlet fitting
1/4 in. female NPT outlet fitting
application(s)
filtration
compatibility
for use with In-Line Stainless Steel Filter Holder
shipped in
ambient
Related Categories
1 of 4
This Item | XX4504700 | XX4502500 | XX4504704 |
|---|---|---|---|
| compatibility for use with In-Line Stainless Steel Filter Holder | compatibility for use with In-Line Filter Holder | compatibility for use with In-Line Filter Holder | compatibility for use with 47-mm HP Filter Holder |
| material silicone seal, stainless steel | material fluoroelastomer FKM seal, stainless steel | material nitrile seal, stainless steel | material stainless steel screen |
| parameter 19 bar max. inlet pressure (275 psi) | parameter 689 bar max. inlet pressure (10,000 psi) | parameter 345 bar max. inlet pressure (5000 psi) | parameter - |
| technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable | technique(s) pressure filtration: suitable |
| H 2.7 cm | H 4.4 cm | H 3.2 cm | H - |
| diam. 7.6 cm | diam. 8.6 cm | diam. 5.1 cm (2.0 in.) | diam. 47 mm |
General description
Applications:
In-Line Stainless Steel Filter Holders are commonly used for the filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved (available in 25 mm and 47 mm).
Filter holder XX4404700 is equipped with a back-pressure support screen. It may be autoclaved with filter in-place, if PTFE-coated support screens, XX4404702 and XX4404704, are used.
- XX4204709, XX4304701, XX4404703, 5614, and 00907P are replacement parts for Filter Holder XX4404700.
Filter holder XX4504700 may be equipped with an upstream filter support screen, XX4504704, for back-pressure protection of filter.
- XX4504704, XX4504705, XX4504710, XX4504713, and XX45047RK are replacement parts for Filter Holder XX4504700.
Replacement parts for the 25mm SS Filter Holder are available as a kit under Catalog Number XX45025RK, which includes: (3) stainless steel hex-cap screws, (3) LCR-treated Buna-N O-rings (2-018), (1) stainless steel support screen, (1) Allen wrench.
In-Line Stainless Steel Filter Holders are commonly used for the filtration of gases or liquids at inlet pressures of 20 to 700 bar. Differential pressure depends on filter type used. All filter holders may be autoclaved (available in 25 mm and 47 mm).
Filter holder XX4404700 is equipped with a back-pressure support screen. It may be autoclaved with filter in-place, if PTFE-coated support screens, XX4404702 and XX4404704, are used.
- XX4204709, XX4304701, XX4404703, 5614, and 00907P are replacement parts for Filter Holder XX4404700.
Filter holder XX4504700 may be equipped with an upstream filter support screen, XX4504704, for back-pressure protection of filter.
- XX4504704, XX4504705, XX4504710, XX4504713, and XX45047RK are replacement parts for Filter Holder XX4504700.
Replacement parts for the 25mm SS Filter Holder are available as a kit under Catalog Number XX45025RK, which includes: (3) stainless steel hex-cap screws, (3) LCR-treated Buna-N O-rings (2-018), (1) stainless steel support screen, (1) Allen wrench.
Application
Filter Holder, 47mm, stainless steel
Biochem/physiol Actions
Pressure
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Yun Long Xue et al.
Nature communications, 11(1), 1461-1461 (2020-03-21)
Polymer crosslinking imbues chemical stability to thin films at the expense of lower molecular transportation rates. Here in this work we deployed molecular dynamics simulations to optimise the selection of crosslinking compounds that overcome this trade-off relationship. We validated these
Related Content
Find analytical tools for air and fluid particle contamination monitoring in industrial environments.
-
What is the maximum operating temperature allowed for XX4404700 (with pressure/without pressure). Thanks
1 answer-
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service