221465

Sodium hydroxide

ACS reagent, ≥97.0%, pellets

• Synonym(s): Caustic soda
• Linear Formula: NaOH
• CAS Number: 1310-73-2
• Molecular Weight: 40.00
• NACRES: NA.21
• PubChem Substance ID: 329752270
• UNSPSC Code: 12352302
• EC Number: 215-185-5
• MDL number: MFCD00003548
• Assay: ≥97.0%
• Form: pellets
• Grade: ACS reagent

Properties

• grade: ACS reagent
• Quality Segment: 200
• agency: suitable for DIN 38407-42, suitable for EPA 1621, suitable for EPA 533, suitable for EPA 8327, suitable for EPA OTM-45, suitable for SM 4500 - NH3
• vapor density: >1 (vs air)
• vapor pressure: <18 mmHg ( 20 °C), 3 mmHg ( 37 °C)
• assay: ≥97.0%
• form: pellets
• technique(s): cell culture | mammalian: suitable, titration: suitable
• impurities: ≤0.001% N compounds, ≤0.02% NH₄OH ppt., ≤1.0% Na₂CO₃
• pH: (ca.> 14 at 100 g/l at 20 °C)
• mp: 318 °C (lit.)
• solubility: water: soluble 1,260 g/L at 20 °C
• density: 2.13 g/cm³ at 20 °C
• anion traces: chloride (Cl^-): ≤0.005%, phosphate (PO₄^3-): ≤0.001%, sulfate (SO₄^2-): ≤0.003%
• cation traces: Fe: ≤0.001%, Hg: ≤0.1 ppm, K: ≤0.02%, Ni: ≤0.001%, heavy metals (as Ag): ≤0.002%
• application(s): PFAS testing
• SMILES string: [OH-].[Na+]
• InChI: 1S/Na.H2O/h;1H2/q+1;/p-1
• InChI key: HEMHJVSKTPXQMS-UHFFFAOYSA-M

Description

General description

Sodium hydroxide (NaOH) also known as caustic soda is a water soluble inorganic base with a wide range of industrial application such as titration,[1] dissolution testing[2] and in impinger to remove acidic gases.[3] It participates in the oxidation of glycerol catalyzed by Au/charcoal or Au/graphite.[4] It participates in solvent-free aldol condensation reaction.

Application

Sodium hydroxide (NaOH) was used in the following processes:

• Preparation of sodium 3,3′-bis(sulfonato)-4,4′-bis(chloroacetamido)azobenzene (BSBCA) that is utilized in protein cross-linking techniques.[5]
• Preparation of electrolyte solution to study the effect of electrolyte composition on the conversion of CO₂ to CO by electrochemical reduction.
• Preparation of CSK (cytoskeleton) buffer for the three-dimensional (3D) slide method of preserving the 3D chromatin structure of testicular germ cells.[6]
• Synthesis of ZSMs (zeolite socony mobils).

Sodium hydroxide may be employed for the deterimination of specific surface area of colloidal silica, via titration. It may be employed for the direct oxidation of sodium borohydride, which was investigated by cyclic and linear voltammetry, chronoamperometry and chronopotentiometry. It may be used to prepare citrate buffer and borate buffer.[7] It may be used in the synthesis of :

• alkylaryl amidosulfobetaines[8]
• (3 -[4-teroctylphenoxyethoxyethoxyethyl] dimethylammonio propane sulfonate (XOSB)[8]
• trisulfobetaines (TriSBn)[8]

Sodium hydroxide may be used as a base in titration methods[1], dissolution testing[2], for adjusting pH and in the impinger to remove acidic gases.[1]
It may be used in the following processes:

• Conversion of glycerol to glyceric acid in the presence of gold catalyst.
• Palladium-catalyzed cross-coupling reaction between vinylalkoxysilanes and aryl bromides or chlorides to form styrenes.

Other Notes

Go to Redi-Dri^™ Product Listing 795429

Legal Information

Redi-Dri is a trademark of Sigma-Aldrich Co. LLC

Safety Information

• pictograms: GHS05
• signalword: Danger
• hcodes: H290,H314
• pcodes: P234 - P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338
• Hazard Classifications: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
• Storage Class: 8B - Non-combustible corrosive hazardous materials
• flash_point_f: Not applicable
• flash_point_c: Not applicable