M5287

MES hydrate

≥99.5% (titration), pH 2.5-4.0 (0.5 M in H₂O), BioXtra

• Synonym(s): 2-(N-Morpholino)ethanesulfonic acid hydrate, 4-Morpholineethanesulfonic acid
• Empirical Formula (Hill Notation): C₆H₁₃NO₄S · xH₂O
• CAS Number: 1266615-59-1
• Molecular Weight: 195.24 (anhydrous basis)
• MDL number: MFCD00149409
• eCl@ss: 32129211
• PubChem Substance ID: 329818007
• NACRES: NA.25

Properties

• product line: BioXtra
• Quality Level: 400
• Assay: ≥99.5% (titration)
• form: crystalline powder
• impurities: Insoluble matter, passes filter test
• ign. residue (900 °C): ≤0.05%
• pH: 2.5-4.0 (0.5 M in H₂O)
• useful pH range: 5.5-6.7
• pKa: 6.1
• solubility: H₂O: 0.5 M, clear, colorless
• anion traces: chloride (Cl^-): ≤0.005%
• cation traces: Al: ≤0.0005%; As: ≤0.0001%; Ba: ≤0.0005%; Bi: ≤0.0005%; Ca: ≤0.002%; Cd: ≤0.0005%; Co: ≤0.0005%; Cr: ≤0.0005%; Cu: ≤0.0005%; Fe: ≤0.0005%; K: ≤0.005%; Li: ≤0.0005%; Mg: ≤0.0005%; Mn: ≤0.0005%; Mo: ≤0.0005%; Na: ≤0.005%; Ni: ≤0.0005%; Pb: ≤0.0005%; Sr: ≤0.0005%; Zn: ≤0.0005%
• absorption: ≤0.020 at 280 in H₂O at 0.5 M; ≤0.025 at 260 in H₂O at 0.5 M
• storage temp.: room temp
• SMILES string: O.OS(=O)(=O)CCN1CCOCC1
• InChI: 1S/C6H13NO4S.H2O/c8-12(9,10)6-3-7-1-4-11-5-2-7;/h1-6H2,(H,8,9,10);1H2
• InChI key: MIIIXQJBDGSIKL-UHFFFAOYSA-N

Description

General description

MES is one of the Good′s buffers, the most extensively used biological buffers. MES is a zwitterionic N-substituted aminosulfonic acid with a morpholinic ring. It does not form complexes with majority of the metals used in environmental and biological studies. It is easily soluble in water and has minimum lipid solubility, making it impermeable to membranes.

Application

MES Hydrate has been used:

• As a component of extraction buffer in the extraction of the enzyme BACE1
• As a component of the reaction mixture for the measurement of 5,10-methenyltetrahydrofolate synthetase (MTHFS) enzyme activity in fibroblasts
• As a component of MES coupling buffer during the coupling of mAb or GST-fusion proteins to carboxylate-modified polystyrene latex (CML) beads

Preparation Note

A buffer using MES can be prepared by titrating with NaOH to the desired pH. Alternatively, stock solutions of MES and MES sodium salt can be mixed to attain the desired pH. Standard mixing tables using stock solutions to prepare buffers of a given pH have been published. MES is not recommended for buffering at pH 7.4; other buffers should be considered.

Storage and Stability

Solutions are stable at 2-8 C for months. Sterilize by filtration through 0.2uM filters. Autoclaving is not recommended for any sulfonic acid buffer. If buffers must be nuclease-free, treat the water first, and then add the buffer after autoclaving. When MES solutions are autoclaved, they turn yellow (although pH does not change measurably). The identity of the yellow breakdown product is unknown.

Other Notes

Easily compare specifications for MES products with the MES specification table.

Solubility: MES is soluble in water, giving a clear colourless solution at concentrations of 0.5M or higher. Similar product MES hydrate M8250 is tested at 20g/80mL water, or 1.3M. The pH of a solution should be between 2.5 and 5, depending on the concentration. A saturated solution at 0°C is approximately 0.65M.

Safety Information

• Storage Class Code: 13 - Non Combustible Solids
• WGK: WGK 1
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable
• Personal Protective Equipment: dust mask type N95 (US), Eyeshields, Gloves