MilliporeSigma
All Photos(2)

Documents

T8943

Sigma-Aldrich

Trizma® Pre-set crystals

BioPerformance Certified, pH 8.3, average Mw 135.4

Sign Into View Organizational & Contract Pricing

Synonym(s):
Tris crystals
NACRES:
NA.25

grade

BioPerformance Certified

form

crystalline powder

mol wt

average Mw 135.4

technique(s)

cell culture | mammalian: suitable

impurities

DNase, RNase, Protease, NICKase, none detected
endotoxin, tested
total aerobic microbial count, tested
≤0.05 A290
≤0.5% water (Karl Fischer)
≤5 ppm Heavy metals (as Pb)

pH

8.30 (25 °C, 0.1 M)(lit.)
8.3

useful pH range

7.0-9.0

solubility

water: 0.66 g/mL, clear, colorless

application(s)

diagnostic assay manufacturing

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
T8818T8443T8193
vibrant-m

T8943

Trizma® Pre-set crystals

Premium Grade
vibrant-m

T8818

Trizma® Pre-set crystals

Premium Grade
vibrant-m

T8443

Trizma® Pre-set crystals

Premium Grade
vibrant-m

T8193

Trizma® Pre-set crystals

Premium Grade
grade

BioPerformance Certified

grade

BioPerformance Certified

grade

BioPerformance Certified

grade

BioPerformance Certified

technique(s)

cell culture | mammalian: suitable

technique(s)

cell culture | mammalian: suitable

technique(s)

cell culture | mammalian: suitable

technique(s)

cell culture | mammalian: suitable

pH

8.30 (25 °C, 0.1 M)(lit.)

pH

8.50 (25 °C, 0.1 M)(lit.)

pH

8.00 (25 °C, 0.1 M)(lit.)

pH

7.80 (25 °C, 0.1 M)(lit.)

application(s)

diagnostic assay manufacturing

application(s)

diagnostic assay manufacturing

application(s)

diagnostic assay manufacturing

application(s)

diagnostic assay manufacturing

impurities

DNase, RNase, Protease, NICKase, none detected, total aerobic microbial count, tested, ≤0.5% water (Karl Fischer), endotoxin, tested, ≤5 ppm Heavy metals (as Pb), ≤0.05 A290

impurities

DNase, RNase, Protease, NICKase, none detected, endotoxin, tested, total aerobic microbial count, tested, ≤0.05 A290, ≤0.5% water (Karl Fischer), ≤5 ppm Heavy metals (as Pb)

impurities

DNase, RNase, Protease, NICKase, none detected, endotoxin, tested, total aerobic microbial count, tested, ≤0.05 A290, ≤0.5% water (Karl Fischer), ≤5 ppm Heavy metals (as Pb)

impurities

DNase, RNase, Protease, NICKase, none detected, endotoxin, tested, total aerobic microbial count, tested, ≤0.05 A290, ≤0.5% water (Karl Fischer), ≤5 ppm Heavy metals (as Pb)

Application

Dissolve in water to make a 0.1M solution. No pH adjustment is necessary. Guaranteed accuracy: ±0.1 pH units.

Tris has a significant temperature coefficient, so select the mixture to give the desired final pH at the desired temperature.
From 5 °C to 25 °C, the pH decreases an average of 0.03 pH units per °C.
From 25 °C to 37 °C, the pH decreases an average of 0.025 pH units per °C.

If a different concentration is desired, note that there is a concentration effect on the pH of the solution.
The product is cell culture tested. It is also tested for low endotoxin levels and analyzed for the absence of nucleases and proteases.

Other Notes

This product is a pre-mixed combination of Trizma base and Trizma HCl that can be used to prepare a common pH value for Tris buffer.
Certain pH electrodes do not give accurate results with Tris buffers.

Preparation Note

Trizma solutions can be autoclaved.

Legal Information

Trizma is a registered trademark of Merck KGaA, Darmstadt, Germany

Storage Class

11 - Combustible Solids

wgk_germany

WGK 1

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

dust mask type N95 (US), Eyeshields, Gloves


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Customers Also Viewed

Slide 1 of 7

1 of 7

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service