The requested Inlet Liner, liner 20478, is available in a pack of 5 liners.
2047805
Inlet Liner, Split/Splitless Type, Single Taper Design (wool packed)
pkg of 5 ea
Skip To
packaging
pkg of 5 ea
L × O.D. × I.D.
78.5 mm × 6.5 mm × 4.0 mm
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | 2047825 | 2048605 | 2048625 |
|---|---|---|---|
| packaging pkg of 5 ea | packaging pkg of 25 ea | packaging pkg of 5 ea | packaging pkg of 25 ea |
| L × O.D. × I.D. 78.5 mm × 6.5 mm × 4.0 mm | L × O.D. × I.D. 78.5 mm × 6.5 mm × 4.0 mm | L × O.D. × I.D. 78.5 mm × 6.3 mm × 4.0 mm | L × O.D. × I.D. 78.5 mm × 6.3 mm × 4.0 mm |
General description
Deactivated (silanized) glass inlet liner for capillary injection ports.
- Fits Agilent (5890, 6890, and 7890)
- Fits Finnigan (9001GCQ)
- Fits Varian (CP-1177 Injector)
The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the sample is evaporated and brought into the gas phase. Split/splitless inlet allows fast sample introduction and vaporization which is highly advantageous for small sample sizes. Though the injection modes for both split and splitless are carried out on the same inlet, there are certain differences like a splitless injection involves the complete introduction of the sample into the column whereas in a split injection, the sample is divided in the inlet as a result only part of the sample is introduced in the column.[1]
Application
Split/splitless inlet equipped with a flip-top sealing system in a thermal desorption unit maybe used to perform thermal desorption (TD) for the determination of pyrethroids in water samples.[2]
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Els Van Hoeck et al.
Journal of chromatography. A, 1157(1-2), 1-9 (2007-05-08)
Stir bar sorptive extraction (SBSE) was applied to the enrichment of pyrethroids in water samples. Analysis was done by retention time-locked GC/MS in selected ion-monitoring (SIM) mode using trans-permethrin-d(6) as internal standard. Thermal desorption (TD) was performed in a classical
Fire Debris Analysis.
Stauffer E
Science, 249-252 (2007)
Articles
Analysis of carbonate solvents in lithium-ion batteries like ethylene carbonate, dimethyl carbonate, diethyl carbonate, and more using SPB®-624 column.
-
Is there a GC Liner available that is single tapered, glasswool packed, with a 4mm inner diameter, splitless, and compatible with the 8890 Agilent GC with MMI inlet? The liner should have a length and outer diameter of 78.5 mm and 6.35 mm, respectively.
1 answer-
Helpful?
-
Active Filters
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service