59320-U

Supelco

SUPELCOGEL C610H, 6% Crosslinked HPLC Column

9 μm particle size, L × I.D. 30 cm × 7.8 mm

Synonym(s):
SUPELCOGEL 6% Cross Linked HPLC Columns
eCl@ss:
32110501
NACRES:
SB.52
Pricing and availability is not currently available.

Quality Level

Agency/Method

suitable for USP L17

parameter

85 °C max. temp.

application(s)

HPLC: suitable

L × I.D.

30 cm × 7.8 mm

matrix

sulfonated polystyrene/divinylbenzene, spherical particle platform

particle size

9 μm

separation technique

ion exclusion

Looking for similar products? Visit Product Comparison Guide

Related Categories

General description

SUPELCOGEL C-610H, 6% crosslinked HPLC columns are prepared specifically for the analysis of organic acids. They are also used in the separation of acetic, propionic, butyric, formic, malic, citric, succinic, lactic, and other acids using a simple isocratic mobile phase and minimal sample preparation.

Legal Information

SUPELCOGEL is a trademark of Sigma-Aldrich Co. LLC

Personal Protective Equipment

dust mask type N95 (US),Eyeshields,Gloves

RIDADR

NONH for all modes of transport

WGK Germany

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificate of Analysis
Certificate of Origin
  1. Which document(s) contains shelf-life or expiration date information for a given product?

    If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.

  2. How do I get lot-specific information or a Certificate of Analysis?

    The lot specific COA document can be found by entering the lot number above under the "Documents" section.

  3. How does the Supelcogel H differ from the Supelcogel C-610H?

    Both the Supelcogel H and the Supelcogel C-610H are microparticulate, macroporous, polystyrene resin columns designed for ion exchange separation of organic acids, carbohydrates, sugar alcohols, and fermentation products.  The C-610H is manufactured with a slightly higher cross linkage.  Maximum temperature for the Supelcogel H is 90° C and for Supelcogel C-610H is 60° C.  Of the two, only the Supelcogel H is available in the 25cm x 4.6mm hardware.

  4. How do I find price and availability?

    There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote.  USA customers:  1-800-325-3010 or view local office numbers.

  5. What is the Department of Transportation shipping information for this product?

    Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product. 

  6. What is the % crosslinkage of the SUPELCOGEL Columns?  

    All SUPELCOGEL resins are 6% crosslinked, except the SUPELCOGEL Ag2, which is 4%.

  7. My question is not addressed here, how can I contact Technical Service for assistance?

    Ask a Scientist here.

  8. My question is not addressed here, how can I contact Technical Service for assistance?

    Ask a Scientist here.

Erika C Pavarina et al.
Applied biochemistry and biotechnology, 98-100, 663-677 (2002-05-23)
Four soil fungi able to grow under low oxygenation conditions were selected and used in studies to determine the production of enzymes that promote the degradation of lignocellulosic materials. The capacity of these fungi to ferment such materials was also...
François Becher et al.
Rapid communications in mass spectrometry : RCM, 16(6), 555-565 (2002-03-01)
There is still a need for direct determination (i.e. without dephosphorylation) of nucleoside reverse transcriptase inhibitor (NRTI) triphosphorylated nucleotides in the peripheral-blood mononuclear cells (PBMCs) of HIV-positive patients. The objective of this paper was first to improve our previously described...
M Zecevic et al.
Journal of chromatography. A, 949(1-2), 61-64 (2002-05-10)
A new high-performance liquid chromatography (HPLC) method was developed for the quality control of pancuronium bromide and its degradation products. The HPLC method used a 5-microm Supelcogel ODP-50 (150x4 cm) column with acetonitrile-CH3OH-water-F3CCOOH (20.5:74.9:0.1, v/v) as the mobile phase (pH...
Articles
Learn more about Bioethanol as a renewable, alternative fuel traditionally produced by the yeast fermentation of sugar.
Read More
Protocols
Fuel Ethanol: Fermentation Analysis by HPLC
Read More
The measurement of organic acids in wines is complementary to sensorial and microbiological quality assessment in fermentation control, for example, because the types and concentrations of the different acids influence the resulting color and taste of the wine.
Read More

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service

Social Media

LinkedIn icon
Twitter icon
Facebook Icon
Instagram Icon

MilliporeSigma

Research. Development. Production.

We are a leading supplier to the global Life Science industry with solutions and services for research, biotechnology development and production, and pharmaceutical drug therapy development and production.

© 2021 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.

Reproduction of any materials from the site is strictly forbidden without permission.