MilliporeSigma
All Photos(1)

Documents

66875-U

Supelco

Empore SPE 96-well Plate

matrix active group C18, well volume 1.2 mL, pk of 1

Sign Into View Organizational & Contract Pricing

Synonym(s):
Empore™ C18 96-Well Plate, 1.2mL, Standard
NACRES:
NB.21

material

polypropylene filter (graded density)

Quality Level

type

(C18)

feature

endcapped

composition

bed wt., 10-15 mg/well

packaging

pk of 1

manufacturer/tradename

CDS Analytical 70-2007-3982-2

extent of labeling

18% C loading

technique(s)

solid phase extraction (SPE): suitable

bed volume

18 μL

membrane avg. diam.

5.5 mm

membrane thickness

0.75 mm

well volume

1.2 mL
1.2 mL

matrix active group

C18

particle size

50 μm

pore size

60 Å pore size

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
66887-U66883-U66884-U
Empore™ SPE Disks Oil and Grease, diam. 47 mm, pk of 20

Supelco

66887-U

Empore SPE Disks

Empore™ SPE Disks matrix active group C18, diam. 47 mm, pk of 20

Supelco

66883-U

Empore SPE Disks

Empore™ SPE Disks matrix active group polystyrene-divinylbenzene (SDB-XC), diam. 47 mm, pk of 20

Supelco

66884-U

Empore SPE Disks

feature

endcapped

feature

-

feature

-

feature

-

composition

bed wt., 10-15 mg/well

composition

-

composition

-

composition

-

packaging

pk of 1

packaging

pk of 20

packaging

pk of 20

packaging

pk of 20

manufacturer/tradename

CDS Analytical 70-2007-3982-2

manufacturer/tradename

-

manufacturer/tradename

CDS Analytical 98-0604-0217-3

manufacturer/tradename

CDS Analytical 98-0604-0223-1

technique(s)

solid phase extraction (SPE): suitable

technique(s)

solid phase extraction (SPE): suitable

technique(s)

solid phase extraction (SPE): suitable

technique(s)

solid phase extraction (SPE): suitable

General description

Empore membrane SPE technology comprises of SPE particles tightly enmeshed within a network of inert PTFE fibrils (90% SPE particles : 10% PTFE, by weight). The SPE-membrane fabrication process results in a highly dense and uniform extraction medium that offers distinct advantages over traditional sorbent/packed-bed SPE products. Empore SPE technology provides a denser, more uniform extraction bed than traditional packed bed products allowing for smaller bed weights, shorter analyte to pore diffusion paths, and more efficient extractions.

The Empore 96-well line is ideal for high throughput SPE allowing users to process up to 96 samples in parallel. The unique Empore technology comprises of a series of polypropylene (PP) pre-filters that are layed on top of the SPE disk. The PP pre-filter acts as depth filter that provides faster flow-rates and reduces the risk of clogging.

Save Time & Money:
  • Reduced SPE Bed Mass = Reduced SPE Solvent & Elution Volumes
  • Minimize SPE eluate evaporation time
  • Potentially allows for direct injection of the SPE eluate
  • Dense & Uniform Extraction Medium = No SPE Channeling and Voiding
  • Efficient mass-transfer kinetics allow for faster flow rates
  • Eliminate SPE fines improving column and instrument life

Features and Benefits

  • Reduced elution volume (≤ 100 μL) allows for direct inject procedured or reduced eluate evaporation times
  • Allows for faster flow-rates without risk of recovery and reproducibility loss
  • Proprietary pre-filter reduces risk of clogging
  • Luer tip collar eliminates potential cross-contamination

Suitability

Note: Empore 96-well SPE products are NOT compatible with Supelco PlatePrep vacuum manifolds (Cat. No. 57192-U and 575650-U). Empore 96-well vacuum manifold (Cat. No. 66879-U) is recommended for use with Empore 96-well products.

Other Notes

Recommended for the high-throughput extraction of moderately-polar to non-polar analytes from aqueous samples (e.g., biological plasma).

Legal Information

Empore is a trademark of CDS Analytical

Disclaimer

CDS Analytical LLC recently acquired the rights to Empore products from 3M Purification Inc. For an interim phase, you may receive products packaged with either manfacturer′s branding.

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service