Z777310

Zenix^®-C SEC-150 (3 µm) HPLC Columns

L x I.D. 15 cm × 4.6 mm, diol bonding phase

• Synonym(s): Zenix^®-C SEC-150 Gel Filtration Column, 3 μm
• UNSPSC Code: 41115709
• NACRES: SB.52
• L × i.d.: 15 cm × 4.6 mm
• Particle size: 3 μm
• Matrix active group: diol bonding phase
• Pore size: 150 Å pore size
• Matrix: spherical silica particle platform

Properties

• Product Name: Zenix^®-C SEC-150 HPLC Column, 3 μm particle size, L × I.D. 15 cm × 4.6 mm
• material: stainless steel hardware
• agency: suitable for USP L59
• product line: Zenix^®
• mol wt: 500-150,000
• feature: endcapped: no
• packaging: pkg of 1 unit
• manufacturer/tradename: Sepax 233150-4615
• parameter: 20 Mpa max. pressure (3000 psi), 80 °C max. temp.
• technique(s): HPLC: suitable
• L × I.D.: 15 cm × 4.6 mm
• impurities: <10 ppm metals
• matrix: spherical silica particle platform
• matrix active group: diol bonding phase
• particle size: 3 μm
• pore size: 150 Å pore size
• operating pH range: 2.0-8.5
• separation technique: size exclusion (SEC)

Description

General description

The bonded phase in Zenix-C SEC columns is more polar than the hydrophilic phase used in Zenix columns, making Zenix-C columns better suited for the gel filtration analysis of more hydrophobic bioopolymers such as membrane proteins and pegylated antibodies. Both Zenix-C and Zenix columns are based on the same high efficiency 3 micron particles and each product line is available in the same wide range of pore sizes to tailor the optimal pore size to the hydrodynamic radius of the biopolymer of interest.

Zenix User Manual

Legal Information

Zenix is a registered trademark of Sepax Technologies

Safety Information

• Storage Class: 11 - Combustible Solids
• wgk: WGK 3
• flash_point_f: Not applicable
• flash_point_c: Not applicable