Document Type
Showing 1-30 of 81 results for "Corning® cell culture flasks surface area 150 cm2"
"Culturing hESCs on the Corning Synthemax Surface,Culturing hESCs on the Corning Synthemax Surface"
transfer to a 150 mL bottle containing FBS. Table 1. Surface Area and Recommended Seeding Densities Growth Area (cm2) Media Volume (mL) H1 (cell/cm2) ...
Product Information Sheet - CHOK1
T-25 cm2 and T-75 cm2 suspension cell (hydrophobic surface treated) culture flasks (Greiner Bio-one 690195 and 658195 or equivalent) • 15 mL and 50 mL sterile conical centrifuge tubes (Corning 430052
N-TER/siRNA nanoparticle mediated knockdown of gene expression
. Table 1: Suggested cell densities and volumes for seeding cells to culture plates Plate size Cells per well Surface area per well (cm2)† Volume per well (mL) 96-well 5.0 x 103 - 1.0 x 104 0.32
Data Sheet - M9650
Ave. Area Beads per Ave. Area No. (g/cm3) (microns) (cm2/bead) gram (cm2/g) M8778...
Data Sheet - M8903
Ave. Area Beads per Ave. Area No. (g/cm3) (microns) (cm2/bead) gram (cm2/g) M8778...
Data Sheet - M8778
Ave. Area Beads per Ave. Area No. (g/cm3) (microns) (cm2/bead) gram (cm2/g) M8778...
Data Sheet - M3553
volume of 0.2 ml/cm2 is then added to the flask and allowed to cover the culture surface for 30 to 60 seconds at room temperature. 3. After removal of the Trypsin-EDTA, cultures are incubated at
Data Sheet - M0682
volume of 0.2 ml/cm2 is then added to the flask and allowed to cover the culture surface for 30 to 60 seconds at room temperature. 3. After removal of the Trypsin-EDTA, cultures are incubated at
Product Information Sheet - S1202
centimeter (cm2) of culture surface. 3 C. Passaging Notes: Human iPS cells typically need to be passaged every 3–4 days. If the culture is allowed to overgrow, the iPS cells will begin
Culture Dishes
. . . . . . . . . . . . . . . . . . . 148 cm2 surface area Sleeve of 5 Corning culture dishes 20 each 500 each Z35,876-2 100 mm · 25 mm...
Data Sheet - G2892
times after enzymatic or chromic acid cleaning. Diameter: 90–150 µm Average area: 1.1 × 10–4 cm2/bead Average area: 475 cm2/g Beads per gram: 4.3 × 106 Precautions and Disclaimer This
Data Sheet - G2517
times after enzymatic or chromic acid cleaning. Diameter: 90–150 µm Average area: 1.1 × 10–4 cm2/bead Average area: 475 cm2/g Beads per gram: 4.3 × 106 Precautions and Disclaimer This
Data Sheet - G4519
times after enzymatic or chromic acid cleaning. Diameter: 90–150 µm Average area: 1.1 × 10–4 cm2/bead Average area: 475 cm2/g Beads per gram: 4.3 × 106 Precautions and Disclaimer This
3D Perfusion Bioreactor Advantages
Comparison between T300 Flask and Bioreactor Chambers The following comparison is based on absolute values of surface area from T300 2D cell culture flasks and total surface area from 4 bioreactor chambers
Data Sheet - M3678
.2ml/cm2 is dispersed over the entire surface area. Cultures should then be incubated for 2 to 3 minutes at 37 °C. Trypsin-EDTA is then removed and cultures re-incubated at 37OC until the cells become
Data Sheet - M3803
.2ml/cm2 is dispersed over the entire surface area. Cultures should then be incubated for 2 to 3 minutes at 37 °C. Trypsin-EDTA is then removed and cultures re-incubated at 37OC until the cells become
Product Information Sheet - P0171
be used to coat tissue culture plasticware. A solution of 0.1 mg/ml is prepared and 0.5 ml is aseptically transferred to a non-tissue culture treated 25 cm2 flask. The flask is gently rocked to evenly
Product Information Sheet - T1706
Transfection Reagent DNA Culture vessel 96-well 48-well 24-well 12-well 6-well 10-cm dish T75 flask Surface area 0.35 cm2 1 cm2 1.9 cm2 3.8 cm2 9.6 cm2 59 cm2 75 cm2...
Evaluation of MDCK Cell Growth and Virus Production in EX-CELL MDCK
Basic Culture Techniques Cells were routinely subcultured every 3 days (72 hours ± 6 hours) at a seeding density of 1 x 105 cells/cm2 (in EX-CELL MDCK) or 5 x 104 cells/cm2 (in α-MEM-10%) in 75 cm2 vent-cap
Product Information Sheet - IPSC0028
centimeter (cm2) of culture surface. Passaging Note: Human iPSC EPITHELIAL-1 cells typically need to be passaged every 3–4 days. If the culture is allowed to overgrow, the iPS cells will begin to
Product Information Sheet - N2913
.6 × 104 3.8 1.2 6-well 1.2–2.4 × 105 9.5 3.0 * Surface areas listed are for Corning Costar tissue culture treated multiwell plates with flat-bottom wells. The dimensions of other manufacturers’
Cell Culture Poster
16 mg/ml. Cell Culture and Cell Growth Assays Cell stocks were maintained at 37 °C, 5% CO2 and 95% Rh in a Thermo Forma model 3310 incubator. Growth vessels were Corning 75 cm2 flasks (Product Code
CHOZN Platform Technical Bulletin
vented cap culture flask (Corning 431143 or equivalent) • 96 well suspension cell treated (hydrophobic surface) culture plates (Greiner Bio-one 655185 or equivalent) • 24 well suspension cell treated
Data Sheet - C8730
Product Code T 3924) is then added to the cells and incubated at room temperature for 2-3 minutes or until cells start to loosen from the surface of culture flask. 3. Immediately add 2-3 volumes of
Product Information Sheet - IPSC1030
square centimeter (cm2) of culture surface. Passaging Note: Human iPSC β-ACTIN GFP cells typically need to be passaged every 3–4 days. If the culture is allowed to overgrow, the iPS cells will begin to
Product Information Sheet - IPSC1028
square centimeter (cm2) of culture surface. Passaging Note: Human iPSC β-ACTIN RFP cells typically need to be passaged every 3–4 days. If the culture is allowed to overgrow, the iPS cells will begin to
Product Information Sheet - SITRANRO
ratio of 2 to 10:1 to the siRNA mass. Culture Plate Diameter [mm] 96-Well Plate 24-Well Plate 6-Well Plate Surface area [cm2 ] 0.4 1.9 9.0 Plated cells [× 105 ] range Suggested starting point
Product Information Sheet - MTOX1000CC24
A  Co dt A = area (cm2) Co = mass of compound initially in the donor compartment dMr/dt = the rate...
Product Information Sheet - CLLS1110
Resuspend cell pellet with the Complete Medium and dispense into a 25 cm2 culture flask. It is recommended to begin the culture in a 25 cm2 flask as the initial adaptation and expansion of the cells is
Dynamic Culture Using Novel Slow Perfusion Biroeactor and Porous Polycaprolactone (PCL) Scaffolds for Bone Regeneration and Repair
The total cell growth area of a 24-well 3D InsertTM-PCL3030 is 18.28 cm2 compared with 1.9 cm2 of total growth area in a traditional 24-well 2D TCP (Figure 1D). 3D Cell Seeding Cells were initially

Social Media

LinkedIn icon
Twitter icon
Facebook Icon
Instagram Icon

MilliporeSigma

Research. Development. Production.

We are a leading supplier to the global Life Science industry with solutions and services for research, biotechnology development and production, and pharmaceutical drug therapy development and production.

© 2021 Merck KGaA, Darmstadt, Germany and/or its affiliates. All Rights Reserved.

Reproduction of any materials from the site is strictly forbidden without permission.