Saltar al contenido
MilliporeSigma

A0701

Sigma-Aldrich

Agarosa, baja temperatura de gelificación

Type VII-A

Sinónimos:

2-hidroxietil agarosa

Slide 1 of 3
Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización

Seleccione un Tamaño

25 G
$341.00
100 G
$869.40

$341.00


Comprobar disponibilidad del carrito

Solicite una orden a granel

Seleccione un Tamaño

Cambiar Vistas
25 G
$341.00
100 G
$869.40

About This Item

CAS Number:
Número MDL:
Código UNSPSC:
41105317
NACRES:
NA.21

Saltar a

Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarle

$341.00


Comprobar disponibilidad del carrito

Solicite una orden a granel
Servicio técnico
¿Necesita ayuda? Nuestro equipo de científicos experimentados está aquí para ayudarle.
Permítanos ayudarle

tpo

Type VII-A

Nivel de calidad

Formulario

powder

técnicas

electrophoresis: suitable

impurezas

≤7% water

ceniza

≤0.4%

turbidez

≤4 NTU (1.5% gel)

ELECTROENDÓSMOSIS (EEO)

≤0.12

mp

65 °C±1 °C

temperatura de transición

gel point 26 °C ±2 °C (1.5% gel)

fuerza de gel

≥250 g/cm2 (1% gel)

trazas de anión

sulfate (SO42-): ≤0.4%

cadena SMILES

O1[C@H]([C@@H]([C@H]([C@H]([C@H]1CO)O)O[C@@H]4O[C@@H]5[C@H]([C@@H](OC5)[C@@H]4O)O[C@@H]6O[C@@H]([C@@H]([C@@H]([C@H]6O)O)O)CO)O)O[C@H]2[C@H]3OC[C@@H]2O[C@H]([C@H]3O)O

InChI

1S/C24H38O19/c25-1-5-9(27)11(29)12(30)22(38-5)41-17-8-4-36-20(17)15(33)24(40-8)43-18-10(28)6(2-26)39-23(14(18)32)42-16-7-3-35-19(16)13(31)21(34)37-7/h5-34H,1-4H2/t5-,6-,7+,8+,9+,10+,11+,12-,13+,14-,15+,16-,17-,18+,19+,20+,21-,22+,23+,24+/m1/s1

Clave InChI

MJQHZNBUODTQTK-WKGBVCLCSA-N

Comparar elementos similares

Ver comparación completa

Mostrar Diferencias

1 of 4

Este artículo
A4018A9045A9414
form

powder

form

powder

form

powder

form

powder

gel strength

≥250 g/cm2 (1% gel)

gel strength

≥200 g/cm2 (1% gel)

gel strength

≥200 g/cm2 (1% gel)

gel strength

≥200 g/cm2 (1% gel)

EEO

≤0.12

EEO

≤0.10

EEO

≤0.1

EEO

≤0.10

Quality Level

200

Quality Level

200

Quality Level

200

Quality Level

200

technique(s)

electrophoresis: suitable

technique(s)

cell culture | mammalian: suitable

technique(s)

cell culture | insect: suitable, cell culture | mammalian: suitable, cell culture | plant: suitable

technique(s)

-

anion traces

sulfate (SO42-): ≤0.4%

anion traces

-

anion traces

sulfate (SO42-): ≤0.10%

anion traces

sulfate (SO42-): ≤0.10%

Descripción general

Agarose is a polymer extracted from agar or agar-bearing marine algae. This purified linear galactan hydrocolloid comprises alternating co-polymers D-galactose and 3,6-anhydro-L-galactopyranose units connected by α-(1→3) and β-(1→4) glycosidic bonds.[1] Agarose is highly biocompatible due to its variable mechanical and diffusion properties.[2]

Aplicación

Excellent for in-gel enzymatic reactions and cloning assays and for recovery of heat-labile samples after electrophoresis
Agarose has been used:
  • to encapsulate Escherichia coli on a hydrogel in tissue culture[2]
  • to entrap Aliivibrio fischeri on a disposable card involved in designing of toxicity biosensors[3]
  • as a the dispersed phase of emulsion during preparation agar beads[4]

Acciones bioquímicas o fisiológicas

Agarose can be used as a gelling agent, to separate nucleic acids electrophoretically because its gels have larger pore sizes than polyacrylamide gels at low concentrations. Unlike polyacrylamide, the consistency of the gels is more solid (but also less elastic) It is also employed to determine cross reaction in immunoelectrophoresis (IEP) and Ouchterlony (double diffusion) plates in which antibody-antigen precipitin lines are studied. Agarose is used to make gel plates or overlays for cells in tissue culture. In addition, it is also used to form a gel matrix (either beaded and/or crosslinked) which can be used in chromatographic separations.

Nota de análisis

A continuación se presenta una lista de las propiedades asociadas a nuestras agarosas:
Contenido de sulfatos - utilizados como un indicador de pureza, ya que los sulfatos constituyen el principal grupo iónico presente.
Fuerza del gel - la fuerza que debe aplicarse a un gel para provocar su fractura.
Punto de gelificación - la temperatura a la cual una disolución acuosa de agarosa forma un gel cuando se enfría. Las disoluciones de agarosa exhiben histéresis en la transición de líquido a gel - es decir, su punto de gelificación no es el mismo que su temperatura de fusión.
Electroendosmosis (EEO) - movimiento de líquido a través del gel. En un gel de agarosa, los grupos aniónicos están pegados a la matriz y no pueden moverse, pero los contra-cationes disociables pueden migrar en la matriz hacia el cátodo, dando lugar a EEO. Dado que el movimiento electroforético de los biopolímeros suele ser en dirección al ánodo, la EEO puede alterar las separaciones debido a la convección interna.

Productos recomendados

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Questions

1–2 of 2 Questions  
  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico