Skip to Content
Merck

Metals and oxidative stress in patients with Parkinson's disease.

Annali dell'Istituto superiore di sanita (2005-10-26)
Giovanni Forte, Alessandro Alimonti, Anna Pino, Paolo Stanzione, Sonia Brescianini, Livia Brusa, Giuseppe Sancesario, Nicola Violante, Beatrice Bocca
ABSTRACT

Twenty-six metals and the oxidative status in 71 patients affected by Parkinson's disease and 44 healthy individuals were compared in order to identify potential biomarkers of the disease. In the patients, the following significant imbalances were found (p < or = 0.05): i) in serum, an increment of Ca, Mg, Ni, Si and V, and a decrement of Cd, Co, Fe, Li, Sn, Zn and Zr; ii) in blood, raised levels of Co, Li, Ni and Si and decreased of Al, Be, Ca, Cd, Fe, Mg, Mo, Sn, Zn and Zr; iii) increased formation of oxidant species and lowered anti-oxidant capacity (p < or = 0.001 for both). Barium, Bi, Cr, Cu, Hg, Mn, Pb, Sb, Sr, Tl and W did not change with the disease. The best discriminating variables between patients and controls were Cd, Co, Fe, Ni and Si in serum (91.2% of cases correctly classified), and Al, Cd, Co, Fe, Mo and Si in blood (98.2% of cases properly classified).

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Aluminum, sputtering target, diam. × thickness 3.00 in. × 0.125 in., 99.9995% trace metals basis
Sigma-Aldrich
Zinc, sputtering target, diam. × thickness 3.00 in. × 0.125 in., 99.995% trace metals basis
Sigma-Aldrich
Chromium, sputtering target, diam. × thickness 3.00 in. × 0.125 in., 99.95% trace metals basis
Sigma-Aldrich
Tin, powder, -100 mesh, 99.99% trace metals basis
Sigma-Aldrich
Cobalt, Carbon coated magnetic, nanopowder, <50 nm particle size (TEM), ≥99%
Sigma-Aldrich
Zinc, shot, 99.9999%
Supelco
L-Cystine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Titanium, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
Vanadium, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
Cobalt, granular, 99.99% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Titanium, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
Molybdenum, powder, <150 μm, 99.9% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 0.025 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Molybdenum, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Manganese, powder, ≥99.9% trace metals basis
Sigma-Aldrich
Nickel, powder, <50 μm, 99.7% trace metals basis
Sigma-Aldrich
Magnesium, dendritic pieces, purified by distillation, 99.998% trace metals basis
Sigma-Aldrich
Zirconium, powder, −100 mesh
Sigma-Aldrich
Nickel, rod, diam. 6.35 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Strontium, granular, 99% trace metals basis
Sigma-Aldrich
Magnesium, turnings, reagent grade, 98%
Sigma-Aldrich
Copper, powder, <75 μm, 99%
Supelco
Copper (impurities), manufactured by MBH Analytical Ltd (39X 17868)
Supelco
Tin (impurities), manufactured by MBH Analytical Ltd (71X SR0)
Sigma-Aldrich
Chromium, chips, thickness ~2 mm, 99.5%
Sigma-Aldrich
Manganese, chips, thickness <2.0 mm, 99%
Sigma-Aldrich
Nickel, foil, thickness 0.5 mm, 99.98% trace metals basis
Sigma-Aldrich
Copper, foil, thickness 0.5 mm, 99.98% trace metals basis