Chuyển đến phần Nội dung
Merck

1.05104

Potassium phosphate dibasic

anhydrous for analysis EMSURE®

Từ đồng nghĩa:

Potassium phosphate dibasic, Dipotassium hydrogen phosphate, Potassium phosphate dibasic, Dipotassium Phosphate, di-Potassium hydrogen phosphate, Dipotassium hydrogenphosphate, Dipotassium phosphate, sec.-Potassium phosphate

Đăng nhập để xem giá theo tổ chức & hợp đồng

Chọn Kích cỡ

Hiện không có thông tin về giá và tình trạng còn hàng

About This Item

Công thức tuyến tính:
K2HPO4
CAS Number:
Trọng lượng phân tử:
174.18
MDL number:
UNSPSC Code:
12352302
EC Index Number:
231-834-5
NACRES:
NA.21
Assay:
≥99.0% (alkalimetric)
Grade:
reagent grade
Form:
solid
Solubility:
1600 g/L

Tài liệu quan trọng

Chuyển đến

Dịch vụ kỹ thuật
Bạn cần trợ giúp? Đội ngũ các nhà khoa học có kinh nghiệm của chúng tôi đang ở đây vì các bạn.
Hãy để chúng tôi hỗ trợ

grade

reagent grade

Quality Level

product line

EMSURE®

assay

≥99.0% (alkalimetric)

form

solid

potency

8000 mg/kg LD50, oral (Rat)

loss

≤1% loss on drying, 130 °C

pH

9 (20 °C, 10 g/L in H2O)

solubility

1600 g/L

density

2.44 g/cm3 at 20 °C

bulk density

700‑1000 kg/m3

anion traces

chloride (Cl-): ≤0.003%
sulfate (SO42-): ≤0.005%

cation traces

Fe: ≤0.0010%
N: ≤0.001%
Na: ≤0.5%
heavy metals (as Pb): ≤0.0005%

storage temp.

15-25°C

SMILES string

[K+].[K+].OP([O-])([O-])=O

InChI

1S/2K.H3O4P/c;;1-5(2,3)4/h;;(H3,1,2,3,4)/q2*+1;/p-2

InChI key

ZPWVASYFFYYZEW-UHFFFAOYSA-L

Đang tìm sản phẩm tương tự? Truy cập Hướng dẫn so sánh sản phẩm

Danh mục liên quan

So sánh các mặt hàng tương tự

Xem toàn bộ so sánh

Hiển thị điểm khác biệt

1 of 4

Mặt hàng này
795496603531.05109
form

solid

form

powder

form

powder or crystals

form

solid

solubility

1600 g/L

solubility

-

solubility

H2O: 1 M at 20 °C, clear, colorless

solubility

1600 g/L

assay

≥99.0% (alkalimetric)

assay

≥98%

assay

≥99.0% (T)

assay

99.99%

Quality Level

300

Quality Level

200

Quality Level

200

Quality Level

100

cation traces

Fe: ≤0.0010%, Na: ≤0.5%, N: ≤0.001%, heavy metals (as Pb): ≤0.0005%

cation traces

Fe: ≤0.001%, Na: ≤0.05%, heavy metals: ≤5 ppm (by ICP-OES)

cation traces

Al: ≤5 mg/kg, As: ≤0.1 mg/kg, Ba: ≤5 mg/kg, Bi: ≤5 mg/kg, Ca: ≤10 mg/kg, Cd: ≤5 mg/kg, Co: ≤5 mg/kg, Cr: ≤5 mg/kg, Cu: ≤5 mg/kg, Fe: ≤10 mg/kg, Li: ≤5 mg/kg, Mg: ≤5 mg/kg, Mn: ≤5 mg/kg, Mo: ≤5 mg/kg, Na: ≤5000 mg/kg, Ni: ≤5 mg/kg, Pb: ≤5 mg/kg, Sr: ≤5 mg/kg, Zn: ≤5 mg/kg

cation traces

-

anion traces

chloride (Cl-): ≤0.003%, sulfate (SO42-): ≤0.005%

anion traces

chloride (Cl-): ≤0.003%, sulfate (SO42-): ≤0.005%

anion traces

chloride (Cl-): ≤50 mg/kg, sulfate (SO42-): ≤100 mg/kg

anion traces

-

Application


  • Bromination of aromatic compounds by residual bromide in sodium chloride matrix modifier salt during heated headspace GC/MS analysis.: This research investigates the role of potassium phosphate dibasic in the bromination of aromatic compounds, providing insights into its application in GC/MS analysis (Fine et al., 2013).

  • Purification of porcine pancreatic lipase by aqueous two-phase systems of polyethylene glycol and potassium phosphate.: The study details the use of potassium phosphate dibasic in the purification of porcine pancreatic lipase using an aqueous two-phase system, demonstrating its utility in biochemical separation processes (Zhou et al., 2013).

  • Cloning, purification, crystallization and preliminary X-ray crystallographic analysis of a cyclophilin A-like protein from Piriformospora indica.: This article discusses the use of potassium phosphate dibasic in the crystallization process of a cyclophilin A-like protein, contributing to structural biology research (Bhatt et al., 2012).

  • A validated enantioselective HPLC assay of dexibuprofen in dexibuprofen tablet formulations.: Potassium phosphate dibasic is utilized in the development of an enantioselective HPLC assay for dexibuprofen, enhancing pharmaceutical analysis techniques (Awad et al., 2012).

  • Monitoring of phenylurea and propanil herbicides in river water by solid-phase-extraction high performance liquid chromatography with photoinduced-fluorimetric detection.: The study employs potassium phosphate dibasic in the analysis of herbicides in river water, demonstrating its application in environmental monitoring and water quality assessment (de la Peña et al., 2003).

Analysis Note

Assay (alkalimetric): ≥ 99.0 %
pH-value (5 %; water): 8.7 - 9.3
Chloride (Cl): ≤ 0.003 %
Sulfate (SO₄): ≤ 0.005 %
Total nitrogen (N): ≤ 0.001 %
Heavy metals (as Pb): ≤ 0.0005 %
Fe (Iron): ≤ 0.0010 %
Na (Sodium): ≤ 0.5 %
Loss on drying (130 °C): ≤ 1.0 %

Legal Information

EMSURE is a registered trademark of Merck KGaA, Darmstadt, Germany

Lớp lưu trữ

13 - Non Combustible Solids

wgk_germany

WGK 1

flash_point_f

Not applicable

flash_point_c

Not applicable


Giấy chứng nhận phân tích (COA)

Tìm kiếm Giấy chứng nhận phân tích (COA) bằng cách nhập Số lô của sản phẩm. Có thể tìm thấy Số lô trên nhãn sản phẩm theo sau từ ‘Lô’.

Đã sở hữu sản phẩm này?

Tìm tài liệu về sản phẩm bạn mua gần đây trong Thư viện tài liệu.

Truy cập thư viện tài liệu

Quy trình

Lopinavir assay setup saves time and improves efficiency with shorter columns, meeting European pharmacopoeia guidelines.

Questions

1–2 of 2 Questions  
  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/418/501/product-dating-information-06-25-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Đội ngũ nhà khoa học của chúng tôi có kinh nghiệm trong mọi lĩnh vực nghiên cứu bao gồm Khoa học đời sống, Khoa học vật liệu, Tổng hợp hóa học, Sắc ký, Phân tích và nhiều lĩnh vực khác.

Liên hệ với dịch vụ kỹ thuật