• USA Home
  • 768642 - Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

EMAIL THIS PAGE TO A FRIEND
768642 Sigma-Aldrich

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

1.0 wt. % in H2O, high-conductivity grade

Synonym: Orgacon HIL-1005, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

Purchase

Properties

Related Categories 3D Printing Materials for Research and Development, Bioelectronics, Biosensing and Bioimaging, Conductive Polymers, Materials Science,
grade   high-conductivity grade
concentration   1.0 wt. % in H2O
resistance   50-120 Ω/sq
refractive index   n20/D 1.341
pH   1.8-2.2
viscosity   7-12 mPa.s(22 °C) (typical)
density   1.002 g/mL at 25 °C

Description

Analysis Note

VLT (excl. substr.) : 80-85%
Work Function: 5.2 -5.4 eV
Coating thickness : 40μm wet
Drying temp. 130°C during 6 min.

Application

Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Conductive ink based on the high conductivity grade PEDOT:PSS polymer dispersion. Suitable for deposition and patterning of transparent conductive films using slot die coating and spin coating in OPV application.

Packaging

25 g in glass bottle

Legal Information

Product of Agfa-Gevaert N.V.

Orgacon is a trademark of Agfa-Gevaert N.V.

General description

A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.

Safety & Documentation

Safety Information

Symbol 
Signal word 
Danger
Hazard statements 
RIDADR 
UN 3265 8 / PGIII
WGK Germany 
3
Protocols & Articles

Articles

3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries, most typically using a layer-by-layer fabrication process. 3D pri...
Zhenyu Bo* (Ph.D Candidate at Northwestern University) and Jia Choi*, PhD, Product Manager


*Materials Science Product Management Team, MilliporeSigma, Milwaukee, WI.
Keywords: Deposition, Nanomaterials, Nanotubes

Applications of Conducting Polymer Devices in Life Sciences

Leslie H. Jimison1, Dion Khodagholy1, Thomas Doublet1,2, Christophe Bernard2, George G. Malliaras1, and Róisín M. Owens1 1Department of Bioelectronics, Ecole Nationale Supérieure des Mines CMP-EMSE, ...
Keywords: Bacterial conjugations, Cancer, Cell culture, Diagnostic, Diffusion, Electronics, Gastrointestinal, Immunofluorescence, Organic electronics, Semiconductor, Spectroscopy

Conducting Polymer Materials for Flexible OPV Applications

The ever increasing global demand for energy has created an opportunity for new technologies that are both cost competitive and "green." Organic Photovoltaics (OPVs) represents the newest generation ...
Luc Vanmaele, Ph.D.

Materials Technology Centre, Agfa Materials Agfa-Gevaert NV,
Septestraat 27, B-2640 Mortsel, Belgium
Keywords: Absorption, Photovoltaics, Polymerization reactions, Positron Emission Tomography, Recombination, Solar cells, Spin coating

Flexible and Printed Organic Thermoelectrics: Opportunities and Challenges

1 Department of Chemistry, Purdue University, 560 Oval Dr. West Lafayette, IN, 47907, USA. 2 The Organic Thermoelectric Laboratory, Materials Research Institute and School of Biological & Chemical Sc...
Xuyi Luo,1 Bob C. Schroeder,2* Chong-an Di,3* Jianguo Mei1*
Material Matters, 2017, 12.3
Keywords: Alternative energy, Dehydration reaction, Deposition, Detection methods, Diffraction, Diffusion, Environmental, Gene expression, Infrared spectroscopy, Nanotubes, Nucleic acid annealing, Polymerization reactions, Renewable energy, Semiconductor, Separation, Solvents, X-Ray diffraction

Graphene Inks for Printed Electronics

The emerging field of printed electronics requires a suite of functional materials for applications including flexible and large-area displays,1 radio frequency identification tags,2 portable energy ...
Ethan B. Secor and Professor Mark C. Hersam

Department of Materials Science and Engineering and Department of Chemistry, Northwestern University, Evanston, IL 60208-3108 USA
Keywords: Chemical vapor deposition, Degradations, Deposition, Electronics, Environmental, Evaporation, Microscopy, Nanomaterials, Nanotubes, Nucleic acid annealing, Oxidations, Photovoltaics, Printed electronics, Semiconductor, Solvents

Inorganic Interface Layer Inks for Organic Electronic Applications

The commercialisation of organic electronic devices such as organic photovoltaic cells (OPV) and organic light-emitting diode (OLED) lighting continues to accelerate. To make these large-area, high v...
Samuel Halim, Ph.D.
Nanograde AG, Switzerland
Keywords: Degradations, Deposition, Nucleic acid annealing, Sol-gel, Spin coating

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Gerardo Hernandez-Sosa,1,2* Ralph Eckstein,1,2 Tobias Rödlmeier,1,2 Uli Lemmer1,2,3 1Lichttechnisches Institut, Karlsruher Institut für Technologie, Engesserstrasse 13, 76131 Karlsruhe, Germany 2Inno...
Gerardo Hernandez-Sosa*, Ralph Eckstein, Tobias Rödlmeier, Uli Lemmer
Material Matters, 2016, 11.2
Keywords: Deposition, Electronics, Positron Emission Tomography, Recombination, Reductions, Solar cells, Thin film deposition

Peer-Reviewed Papers
15

References

Related Products

Technical Service:

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Bulk Ordering & Pricing:

Need larger quantities for your development, manufacturing or research applications?